the h80/100 pumps flow .5gpm looks like i'll start a custom loop using my h100 as base and slowly work my way up to replacing everything. thanks for doing the research and work finding flow rates and how well the smaller pump supplies a real 240 rad. my plans: buy a rez, next a real rad, then get the block n pump. it'll take longer and cost more than going custom straight off but i'll still have a modded h100 when im done.
Im very happy with my H100i, but i replaced the fans with 2x noctua 120mm pwn fans, and it helped alot. MUCH lower noise, and my idle and load temp dropped 3-4 C´s ontop of that. Ofc it adds some expense, but i couldnt live with the noisy crap fans Corsair sold with the H100i.
Second paragraph, first line read: you're dealing with a traditional 120mm radiator in the Water 3.0 Pro, you get a double-thick 120mm radiator with the Water 3.0 Pro, and then you go back to standard thickness and double-length with the 240mm radiator in the Water 3.0 Extreme
when it should read:
you're dealing with a traditional 120mm radiator in the Water 3.0 Performer, you get a double-thick 120mm radiator with the Water 3.0 Pro, and then you go back to standard thickness and double-length with the 240mm radiator in the Water 3.0 Extreme
Has anyone try to mod one of these to use a huge (like 55 gal. drum) tank of water instead of a radiator and fan? I'm not saying it's practical but it would be cool to see it done. That would be a huge heatsink.
I do not remember where I saw this but some guy hooked his water cooler to his toilet. No, I am not kidding. He ran plumbing to the tank on the back of the toilet and every time his temperature began to climb he would flush the toilet and get a new surge of cool water. I am pretty sure you could find the article if you wanted to look it up, it was pretty entertaining to be honest.
that could work depending on your usage, if you are always running at load (folding at home or something along those lines) it wouldnt help because eventually all the water would get warm (and without a radiator it would continue to heat up), but if you only run for relatively short periods of time (lets say an hour or two for gaming) then that might work. The most impressive system I saw, was someone ran a a server farm in his basement, with water running outside to copper pipes which ran deep under his yard, so he basically used geothermal cooling for his computers, kind of a crazy setup, but using the Earth as your heatsink has its advantages.
You didn't setup the radiator like people who do full PC liquid cooling setups do, which is going to perform better than how you did it. Fans need to be setup as intakes on the radiator, not exhaust. It almost guarantees the radiator will get the coolest air possible which isn't possible when setup as exhaust.
Copyediting error in the second paragraph of the first page. "The variety of coolers is pretty simple: you're dealing with a traditional 120mm radiator in the Water 3.0 Pro, you get a double-thick 120mm radiator with the Water 3.0 Pro, and then you go back to standard thickness and double-length with the 240mm radiator in the Water 3.0 Extreme."
Whilst being prejudical is an unwelcome trait, being prejudicial on behalf of Truth is an asset all men strive for. Truth be told, "Thermaltake" might sound both Tojo-ish and English, but as all know, this beastie is but a mere pretender to "watercooling", mediocrity being its forte when it comes to watercooling. Not when "Asetek" is supporting one's watercooled butt, that is. After some Bavarian ariy-fairyness having levelled Ten on the religiosity crapola. That is what you'll get for mixing Taiwanese panda greeny-loony cutieness with sophisticated Western gender-bending taste.
Even so, DNA being thicker than water, the same nonsense prevailed. LOUD and LOUDER. What is "entry-level" watercooling if it is not about lowering loudness? What? Eets about pandering to fairies and their pirouettes? This has to be some Choseness Frivolity & Nonsense masquerading as Sense & Sensibility. It looks like fashion has finally caught up with PC, Performance and Overclocking. Either that or the fairies have accidentally beached themselves on the PC Cloud Cuckooland. C'mon chuck, give us the other one will ya.
We’ve updated our terms. By continuing to use the site and/or by logging into your account, you agree to the Site’s updated Terms of Use and Privacy Policy.
18 Comments
Back to Article
Wixman666 - Friday, May 31, 2013 - link
FIRST! OMG!kyuu - Friday, May 31, 2013 - link
Do you feel like your existence has somehow been validated by this tremendous feat?Jorgisven - Friday, May 31, 2013 - link
Please don't validate him with a response. Meanwhile, I'm wondering on product availability. Anyone able to find this or a release date?nocturna351 - Wednesday, April 16, 2014 - link
SECOND! OMG!cindywu - Friday, May 31, 2013 - link
the h80/100 pumps flow .5gpmlooks like i'll start a custom loop using my h100 as base and slowly work my way up to replacing everything. thanks for doing the research and work finding flow rates and how well the smaller pump supplies a real 240 rad.
my plans: buy a rez, next a real rad, then get the block n pump. it'll take longer and cost more than going custom straight off but i'll still have a modded h100 when im done.
again, thanks for the work. http://goo.gl/9tsYx
flyingpants1 - Friday, May 31, 2013 - link
Why?nilfisktun - Friday, May 31, 2013 - link
Im very happy with my H100i, but i replaced the fans with 2x noctua 120mm pwn fans, and it helped alot. MUCH lower noise, and my idle and load temp dropped 3-4 C´s ontop of that.Ofc it adds some expense, but i couldnt live with the noisy crap fans Corsair sold with the H100i.
pintycar - Friday, May 31, 2013 - link
Second paragraph, first line read: you're dealing with a traditional 120mm radiator in the Water 3.0 Pro, you get a double-thick 120mm radiator with the Water 3.0 Pro, and then you go back to standard thickness and double-length with the 240mm radiator in the Water 3.0 Extremewhen it should read:
you're dealing with a traditional 120mm radiator in the Water 3.0 Performer, you get a double-thick 120mm radiator with the Water 3.0 Pro, and then you go back to standard thickness and double-length with the 240mm radiator in the Water 3.0 Extreme
rms - Friday, May 31, 2013 - link
The H220 looks better with every review, no wonder it's often oosEJ257 - Friday, May 31, 2013 - link
Has anyone try to mod one of these to use a huge (like 55 gal. drum) tank of water instead of a radiator and fan? I'm not saying it's practical but it would be cool to see it done. That would be a huge heatsink.Wetworkz - Friday, May 31, 2013 - link
I do not remember where I saw this but some guy hooked his water cooler to his toilet. No, I am not kidding. He ran plumbing to the tank on the back of the toilet and every time his temperature began to climb he would flush the toilet and get a new surge of cool water. I am pretty sure you could find the article if you wanted to look it up, it was pretty entertaining to be honest.EJ257 - Saturday, June 1, 2013 - link
That's actually pretty brilliant. Was it this guy?http://www.extremetech.com/extreme/124677-how-to-c...
jkresh - Sunday, June 2, 2013 - link
that could work depending on your usage, if you are always running at load (folding at home or something along those lines) it wouldnt help because eventually all the water would get warm (and without a radiator it would continue to heat up), but if you only run for relatively short periods of time (lets say an hour or two for gaming) then that might work. The most impressive system I saw, was someone ran a a server farm in his basement, with water running outside to copper pipes which ran deep under his yard, so he basically used geothermal cooling for his computers, kind of a crazy setup, but using the Earth as your heatsink has its advantages.Adamantine - Friday, May 31, 2013 - link
You didn't setup the radiator like people who do full PC liquid cooling setups do, which is going to perform better than how you did it. Fans need to be setup as intakes on the radiator, not exhaust. It almost guarantees the radiator will get the coolest air possible which isn't possible when setup as exhaust.dwade123 - Friday, May 31, 2013 - link
They should start making those compatible with CPU & GPU. Now that is truly a All-in-One design.Galcobar - Friday, May 31, 2013 - link
Copyediting error in the second paragraph of the first page."The variety of coolers is pretty simple: you're dealing with a traditional 120mm radiator in the Water 3.0 Pro, you get a double-thick 120mm radiator with the Water 3.0 Pro, and then you go back to standard thickness and double-length with the 240mm radiator in the Water 3.0 Extreme."
That first "Pro" should be "Performer."
vishwa108 - Saturday, June 1, 2013 - link
Whilst being prejudical is an unwelcome trait, being prejudicial on behalf of Truth is an asset all men strive for. Truth be told, "Thermaltake" might sound both Tojo-ish and English, but as all know, this beastie is but a mere pretender to "watercooling", mediocrity being its forte when it comes to watercooling. Not when "Asetek" is supporting one's watercooled butt, that is. After some Bavarian ariy-fairyness having levelled Ten on the religiosity crapola. That is what you'll get for mixing Taiwanese panda greeny-loony cutieness with sophisticated Western gender-bending taste.Even so, DNA being thicker than water, the same nonsense prevailed. LOUD and LOUDER. What is "entry-level" watercooling if it is not about lowering loudness? What? Eets about pandering to fairies and their pirouettes? This has to be some Choseness Frivolity & Nonsense masquerading as Sense & Sensibility. It looks like fashion has finally caught up with PC, Performance and Overclocking. Either that or the fairies have accidentally beached themselves on the PC Cloud Cuckooland. C'mon chuck, give us the other one will ya.
xaml - Sunday, June 2, 2013 - link
What is this, if not an attempt at pooetry? Is it that your head case is the one thing in urgent need of water cooling? Thermal it. Take!