ASUS Launches ROG Ares III for Water Cooling Builds
by Ian Cutress on June 2, 2014 11:40 PM EST- Posted in
- GPUs
- AMD
- Asus
- ROG
- Computex 2014
The Radeon R9 295X2, or any graphics card that comes pre-liquid cooled, comes up against a barrier. There will be a market segment that cares more about the card than the cooling, and would rather not have to spend the extra on the cooling because they want to apply their own, or a waterblock. Aside from the leaked images on the web showing a triple-slot air cooled version of the 295X2 from Powercolor, ASUS is going to address this issue with the Ares III for users building their own water cooling loops.
The new card will come pre-fitted with a custom designed EK water block, and only 500 units will be made so expect this thing to be pricy. The two Hawaii XT GPUs are said to be ‘hand-chosen’ for the cards, and one would assume that the card comes with a decent overclock pre-installed. If not, the main purpose of the card would be for the user to overclock, or for the system to run as cool and quiet as possible. Based on internal testing, ASUS states that a 120x3 water cooling loop is recommended as a minimum.
The GPU is single slot, meaning that the top of the card seems taller than the standard height of GPU. Pricing is not yet set but expect a release in Q3.
13 Comments
View All Comments
MartinT - Tuesday, June 3, 2014 - link
You're probably right, IIRC the distance between PCIe slots is 0.8" / 0.20xx cmmalkolm - Tuesday, June 3, 2014 - link
Correct me if i'm wrong, but doesn't this beast draw up to 500W out of your PSU?Given this, a recommendation for only 3x120 as cooling area sounds a little bit to less for me. What one could expect from this little bit of area are tempartures not much better then air cooled.
If one wants this cool AND quiet, and this is more or less the aim for all custom liquid loops, i would recommend at least double area, and thus a really big enclousure or an external solution.
extide - Tuesday, June 3, 2014 - link
Don't forget the ADM version uses a 1x120mm for the 2 GPU's and the temps are pretty decent. I think a 3x120 for the whole car will be fine. Now, if you try to throw a hot CPU and another card on there... Yeah you'll need more! :)