Seagate has introduced a trio of 10TB hard drive models today, as part of the launch of their new Guardian series. There are three main parts to the series: BarraCuda Pro, IronWolf and SkyHawk, all focusing on slightly different markets and available in capacities up to 10TB. The top 10TB models from each segment are based on helium technology, which we have covered in detail in multiple articles. We will be taking a look at the NAS-focused IronWolf series next month, but, a quick look at the performance and features of the BarraCuda Pro is the focus of this capsule review.

Introduction and Testing Methodology

The Seagate BarraCuda Pro 10TB is a 7200RPM SATAIII (6 Gbps) hard drive based on helium technology with a 256MB DRAM cache. According to Seagate, it typically draws around 6.8W, making it one of the most power efficient 3.5" hard drives in the market. It targets creative professionals with high-performance desktops, home servers and/or direct-attached storage units. It is meant for 24x7 usage (unlike traditional desktop-class hard drives) and carries a workload rating of 300TB/year, backed by a 5-year warranty. The various aspects of the drive are summarized in the table below.

Seagate BarraCuda 10TB Specifications
Model Number ST10000DM0004
Interface SATA 6 Gbps
Sector Size / AF 4096
Rotational Speed 7200 RPM
Cache 256 MB (Multi-segmented)
Rated Load / Unload Cycles 300 K
Non-Recoverable Read Errors / Bits Read < 1 in 1014
MTBF 1 M
Rated Workload ~ 300 TB/yr
Operating Temperature Range 0 to 60 C
Physical Parameters 14.7 x 10.19 x 2.61 cm; 650 g
Warranty 5 years
Price (in USD, as-on-date) $535

A high-level overview of the various supported SATA features is provided by HD Tune Pro, and shows support for common mechanical features such as NCQ.

The main focus of our evaluation is the performance of the HDD as an internal disk drive in a PC. Towards this, we used one of the SATA 6 Gbps ports off the PCH in the testbed outlined below.

AnandTech DAS Testbed Configuration
Motherboard Asus Z97-PRO Wi-Fi ac ATX
CPU Intel Core i7-4790
Memory Corsair Vengeance Pro CMY32GX3M4A2133C11
32 GB (4x 8GB)
DDR3-2133 @ 11-11-11-27
OS Drive Seagate 600 Pro 400 GB
Optical Drive Asus BW-16D1HT 16x Blu-ray Write (w/ M-Disc Support)
Add-on Card Asus Thunderbolt EX II
Chassis Corsair Air 540
PSU Corsair AX760i 760 W
OS Windows 8.1 Pro
Thanks to Asus and Corsair for the build components

Performance - Raw Drives

HD Tune Pro 5.50 was used to run a number of tests on the unformatted drive. The gallery below presents some interesting numbers for various access types, and how the location of the data in the platter can affect the performance.

Sustained sequential reads can reach a maximum of 258 MBps, but it can also drop down to as low as 110 MBps. Sequential writes exhibit similar numbers. Random reads get around 65 IOPS, while writes come between 56 IOPS and 264 IOPS, depending on the transfer size.

DAS Benchmarks

The BarraCuda Pro was connected to a 6 Gbps SATA port off the PCH in our DAS testbed. After formatting in NTFS, it was subject to our DAS test suite.

Consumers opting for drives such as the 10TB Seagate BarraCuda Pro typically need high-capacity local storage for holding and editing / processing large-sized multimedia files. Prior to taking a look at the real-life benchmarks, we first check what CrystalDiskMark has to report for the drive.

In order to tackle the real-life use-case of transferring large amounts of data back and forth from the drive, we created three test folders with the following characteristics:

  • Photos: 15.6 GB collection of 4320 photos (RAW as well as JPEGs) in 61 sub-folders
  • Videos: 16.1 GB collection of 244 videos (MP4 as well as MOVs) in 6 sub-folders
  • BR: 10.7 GB Blu-ray folder structure of the IDT Benchmark Blu-ray (the same that we use in our robocopy tests for NAS systems)
Seagate BarraCuda Pro 10TB robocopy Benchmarks (MBps)
  Write Bandwidth Read Bandwidth
Photos 201.32 181.05
Videos 205.84 192.58
Blu-ray Folder 203.87 199.62

While processing our DAS suite, we also recorded the instantaneous transfer rates and temperature of the drive. Compared to typical disk drives, the write transfers show higher instantaneous speeds due to a combination of the firmware and the 256 MB cache inside the drive. However, sustained write rates are comparable to other high-capacity drives when the cache is excausted. The temperature of the unit at the end of the transfers (more than 250GB of traffic) was less than 35C, pointing to the power-efficiency of the platform.

For the use-case involving editing of multimedia files directly off the disk, we take advantage of PCMark 8's storage benchmark. The storage workload is a good example of a user workload, involving games as well as multimedia editing applications. The command line version allows us to cherry-pick storage traces to run on a target drive. We chose the following traces.

  • Adobe Photoshop (Light)
  • Adobe Photoshop (Heavy)
  • Adobe After Effects
  • Adobe Illustrator

Usually, PCMark 8 reports time to complete the trace, but the detailed log report has the read and write bandwidth figures which we present in our performance graphs. Note that the bandwidth number reported in the results don't involve idle time compression. Results might appear low, but that is part of the workload characteristic.

Seagate BarraCuda Pro 10TB PCMark8 Storage Benchmarks (MBps)
  Write Bandwidth Read Bandwidth
Adobe Photoshop (Light) 245.54 10.76
Adobe Photoshop (Heavy) 234.15 12.87
Adobe After Effects 76.35 10.18
Adobe Illustrator 174.86 9.67

Performance with a USB 3.0 Bridge

Seagate suggests that the BarraCuda Pro 10TB is suitable for use in direct-attached storage systems. We put the drive behind an Inatek USB 3.0 to SATA adaptor (using the ASMedia ASM1153E chipset) and processed the CrystalDiskMark benchmark.

]

During the benchmark process, we also noted the power consumed by the adaptor at the wall. We found that the combination could draw up to 12W during the spin-up of the hard drive. With no disk traffic, the power consumption dropped down to 3.4W. During the benchmarking process itself, the power consumption at the wall ranged between 6W and 8W.

Concluding Remarks

Coming to the business end of the review, it can be clearly seen that the BarraCuda Pro 10TB is a unique product in the market. It is not often that we see a leading capacity 'desktop-class' hard drive rated for 24x7 operation or workload ratings of 300TB/year. To top it all, Seagate is even throwing in a 5-year warranty. The only disappointing aspects are the load/unload cycle rating and the MTBF - given the positioning of the product, it could have been closer to that of the enterprise drives.

In our evaluation, the drive successfully met all of Seagate's claims. It is pleasing to see helium make its appearance in mass-market consumer devices. Hopefully, economies of scale should help the current MSRPs to go further down in the future.

There is a price to pay for all of the above aspects, though. The MSRP of the BarraCuda Pro 10TB is $535, and it is quite a bit more than that of the other 10TB drives being launched by Seagate today - the SkyHawk surveillance drive ($460) and the IronWolf NAS drive ($470). Seagate's Enterprise 10TB Helium drive, by comparison, is currently on Amazon for $600. We will address these drives in due course in order to accurately map Seagate's performance roadmap.

Comments Locked

69 Comments

View All Comments

  • DanNeely - Tuesday, July 19, 2016 - link

    You're completely right. Until Ryan catches up on his GPU review backlog Ganesh shouldn't be allowed to post about storage systems, Anton shouldn't be allowed to post new articles, E. Fylladitakis shouldn't be allowed to write about case or PSU performance, etc.
  • Eden-K121D - Tuesday, July 19, 2016 - link

    Also You shouldn't be allowed to comment ;-/
  • DanNeely - Tuesday, July 19, 2016 - link

    Threading fail. *sigh* This was supposed to be a sarcastic reply to bug77's comment immediately above mine.
  • bigboxes - Wednesday, July 20, 2016 - link

    Yes, fail indeed. *eyeroll*
  • JoeyJoJo123 - Tuesday, July 19, 2016 - link

    It's ogre! HDD's are dead! SSDs won! Just give up!
  • magusnebula - Tuesday, July 19, 2016 - link

    You do realize that 80%-90% of cloud storage is cold storage that doesnt need speed or performance, just lots and lots of capacity for cheap. HDD's are going to be around for a good while.
  • bigboxes - Wednesday, July 20, 2016 - link

    Since we're just cutting and pasting here...

    "And yet they're haven't.

    4TB SSD = $1,500
    4TB HDD = $150

    Not to mention unpowered SSDs are not a good idea for archived storage. Please feel free to inform us how dead HDDs are. LOL"
  • Alexvrb - Wednesday, July 20, 2016 - link

    There's no reason they couldn't design a cold storage system using SSDs that very occasionally wakes and refreshes the drive before powering back down. Plus commercial grade SSDs are more resilient to begin with than an entry level consumer drive.

    Other than that, yes, HDDs are here for a while yet. But in consumer systems they're increasingly becoming secondary storage only, and even that is becoming less essential for a lot of regular people as time goes on. I'll still need a secondary HDD or two for the foreseeable future, myself.
  • webdoctors - Tuesday, July 19, 2016 - link

    Dang, did U see those 1060 benchmarks?! Those are ridonculous! Faster than a 980! Crazzzzzzy.
  • Alexvrb - Wednesday, July 20, 2016 - link

    Really? I have seen a lot of benchmarks that don't agree. On average looks like it falls between a 970 and a 980. Don't get me wrong that's still very impressive. But at $300 for the 6GB it's hardly earth shattering. Hopefully a decent aftermarket model will cost around the same and OC a lot better. I think the 1070 launch was more impressive compared to other cards in its price range.

Log in

Don't have an account? Sign up now