The last few weeks have been tough for OCZ. The company filed for bankruptcy and a week later OCZ announced that Toshiba will be acquiring their assets. While there is a lot going on at OCZ at the moment, their business continues to operate normally in the mean time. The proof of that is OCZ's latest release: the Intrepid 3000. It is OCZ's first in-house developed enterprise SSD, although quite surprisingly it utilizes the Marvell 88SS9187 based Everest 2 platform (same as in Vertex 4) instead of the newer, fully in-house developed Barefoot 3 platform. Enterprise drives often require significantly more validation than client drives, which is the likely reason why the Intrepid 3000 uses an older platform. The other possibility is that the Barefoot 3 is simply not equipped for enterprise, although I find that unlikely. Nevertheless the firmware has been developed by OCZ from a scratch, which is new to OCZ's enterprise offerings since OCZ has relied on SandForce for the controller/firmware in the past. Due to the controller, the Intrepid 3000 is still a 2.5" SATA 6Gbps device. We are seeing some shift towards SAS 12Gbps and PCIe in the enterprise but SATA drives have their place in the market thanks to broad support and compact form factor. 

The Intrepid 3000 consists of two models: the 3600 and 3800. The only difference between the two is that the 3600 uses regular consumer-grade MLC (i.e. cMLC), whereas the 3800 utilizes more durable eMLC NAND. The 3600 suits better for read intensive environments (e.g. media streaming, online archiving) where write endurance isn't a top priority while the 3800 can be used for workloads that tend to be write intensive, such as VM infrastructures and email servers. Both models are available in capacities of 100GB, 200GB, 400GB and 800GB -- the over-provisioning is likely 28% (standard for enterprise drives), which translates to raw NAND capacities of 128GiB, 256GiB, 512GiB and 1024GiB respectively.

OCZ Intrepid 3000 Specifications
  Intrepid 3600 Intrepid 3800
Capacities (GB) 100, 200, 400, 800
Controller Marvell 88SS9187 (OCZ Everest 2)
NAND 19nm MLC 19nm eMLC
Steady-State 128KB Sequential Read 520MB/s
Steady-State 128KB Sequential Write 470MB/s
Steady-State 4KB Random Read 91K IOPS
Steady-State 4KB Random Write 40K IOPS
Endurance 1 DWPD 5 DWPD
Power Consumption 3.7W
Warranty 5 years

Since the Intrepid 3000 is an enterprise-class SSD, all the performance numbers OCZ reports for are worst-case scenarios. 40K random write IOPS at steady-state sounds about right when compared to the Vector and Vector 150 with 25% OP. We are mostly limited by NAND when it comes to steady-state performance, which is why enterprise SSDs are not really better than client drives with added over-provisioning.

OCZ Intrepid 3000 Endurance (Total Bytes Written)
  Intrepid 3600 Intrepid 3800
100GB 184TB 932TB
200GB 379TB 1874TB
400GB 784TB 3738TB
800GB 1498TB 7485TB

With focus on the enterprise market, the Intrepid 3000 features power-loss protection, 256-bit AES encryption, advanced ECC (up to 85 bits per 2Kb of data) and end-to-end data protection. There is also data redundancy similar to SandForce's RAISE functionality and the idea is that some of the NAND is used for parity to protect against page/block failures. Furthermore, OCZ provides a web-based StoragePro XL application with the Intrepid 3000, which is meant for system administrators and it allows them to monitor and manage OCZ drives remotely.

Availability for these drives is slated for Q1'14, but OCZ has not released pricing yet.

Given OCZ situation, I have reservations recommending their products at this time. OCZ has assured that all product warranties will be honored but OCZ also told us that they can only promise that for the time being. In other words, there is no guarantee that Toshiba will take responsibility of OCZ's warranties but the negotiations are still on-going. If Toshiba is interested in OCZ's enterprise customers, it would make sense to cover the warranty costs because otherwise customer may go elsewhere. The same does apply to consumers too but on a smaller scale because the enterprise market has fewer customers and hence every single one of them is crucial. You'll be the first to know once we hear more about the terms of the acquisition and the state of existing product warranties.

Comments Locked


View All Comments

  • melgross - Saturday, December 14, 2013 - link

    That's not actual drive endurance. That's the theoretical NAND endurance, which is assumed if the drive itself doesn't fail first.
  • Kristian Vättö - Sunday, December 15, 2013 - link

    It's not theoretical NAND endurance. The endurance spec is needed for warranty because if the spec is exceeded, the manufacturer will not replace a failed drive. Consumer drives with cMLC NAND have significantly worse endurance ratings (e.g. Vector 150 has 91TB) even though the actual NAND isn't any worse. However, the drive hasn't been validated as much, hence the difference in endurance.

    sheh, you're correct that 1DWPD and 5DWPD are the endurance ratings, but I wanted to list them per capacity as well since at least I didn't get exactly the same numbers as OCZ.
  • FunBunny2 - Thursday, December 12, 2013 - link

    Umm... more likely Barefoot X is just rebranded Marvell silicon. Same as before.
  • JlHADJOE - Thursday, December 12, 2013 - link

    Even disregarding OCZ's track record when it comes to reliability... Who in their right mind would go out and buy an enterprise drive, where reliability and support are paramount, from a company that's about to go bankrupt?
  • DarkStryke - Thursday, December 12, 2013 - link

    I can't think of a CTO worth his or her salt that would ever put OCZ anything in their IT deployment plans. Why are you even reporting on this garbage?

    'Hey guys, here's a new unproven "enterprise grade" drive from a company with terrible support history that's currently going bankrupt, but we're going to withhold our opinion for a few weeks' Is this how it's going to be for future SSD material on
  • gostan - Friday, December 13, 2013 - link

    "If Toshiba is interested in OCZ's enterprise customers, it would make sense to cover the warranty costs because otherwise customer may go elsewhere."

    That is only if OCZ had any enterprise customers.

    Why so much love for OCZ AT?
  • FunBunny2 - Friday, December 13, 2013 - link

    Here's the things: Toshiba now has Violin and OCZ (with Barefoot X, if they actually exist). Toshiba also has its own toggle NAND. The scenario: Toshiba now has a structure to build SSD from consumer to prosumer to enterprise on stepped technology. Whether it keeps OCZ or Violin brand names going forward is a separate issue.
  • Kristian Vättö - Sunday, December 15, 2013 - link

    OCZ does have enterprise customers. In 2012 their market share in the enterprise SSD revenue was 2.4%.
  • Foeketijn - Friday, December 13, 2013 - link

    Brand loyalty is a funny thing. People tend to promote stuff that they have themselves. Even if it was RMAed. I believe it's a psychologic thing to keep your self-esteem on a high level. I bet if Toshiba keeps the OCZ brand running, they are going to make an easy buck on all the people who ask a self acclaimed 'wizzkid' I want a SSD and and the reply is going to be "Well, I have an OCZ drive" and an other one takes the gamble. That professional sites didn't start saying "Just No" to every OCZ product a few years back, I can't comprehend. They had a failure rate way higher then the competition, in several product lines. And got the benefit of the doubt every single time. Even at this moment AT doesn't say "AVOID!". Just proves AT writers are also human.
  • ArmedandDangerous - Saturday, December 14, 2013 - link

    And? The Marvel controller in the Vertex 4 is still pretty darn fast, and it fixed the dead SSD issue from previous generations.

Log in

Don't have an account? Sign up now