ASUS ROG Press Conference: Motherboards

For at least every Computex I have attended, ASUS have put on a show – the ROG press conference.  This is ASUS’ opportunity to showcase their gaming range, the updates to the gaming range and is definitely a spectacle for the eyes.  This year there are a number of items that certainly pique my interest.

As expected, the ROG motherboard range we have seen already were showcased – the Maximus VI Hero, Gene and Extreme.  Typically part of this range is the Formula, which was announced today.

As with the Maximus V Formula, ASUS are carving out a niche for the Formula – it is the gaming motherboard to have, much like the Extreme is the performance motherboard to own.  On the Formula this generation, the most obvious improvement is the Formula Armor.  This combination backplate and frontage is designed to help rigidity – ASUS understand that high-end users going after the Formula are going to be big GPU gamers, where the GPUs can weigh 2 pounds or more.  This armor is designed to help make sure the motherboard does not bend when subject to these heavy weights over long periods of time.

The Formula also improves upon audio, with an upgrade to SupremeFX – we have the Realtek ALC1150 audio codec for the rear with a front-panel CirrusLogic DAC for 120 dBA SNR, all with improved EM shielding, filter caps and headphone amplifiers for 600 ohm headphones.  The heatpipe arrangement in the power delivery gets an upgraded design (codename ‘CrossChill’), and the mini-PCIe combo gets an upgrade, with instead of mSATA we have the first M.2 connector on a motherboard.  The Formula also comes with 802.11ac as part of the combo card.

With the ROG motherboard range, ASUS had three models – over the past few weeks we learned this had improved to four with the Hero.  We can now make that range a total of five motherboards, with the announcement of the Maximus VI Impact, the mini-ITX model.

If our readers remember back to my X79 ROG review of the range and the brand, we had an interview with Kris Huang, the PM for the ROG series.  I quizzed him on the possibility of a mini-ITX ROG motherboard, and the response was fairly non-specific.  Now it is clear that at the time they had had the idea internally and were developing it into the Impact we see today.

So with a mini-ITX SKU, measuring 17cm x 17cm, there is little space to provide the more typical ‘gaming’ features.  Despite this limitation, ASUS have provided the Impact with more innovation than you can imagine.

So it was perhaps predictable that the ROG mITX would have power delivery on a daughter board at right angles to the motherboard, much like what we saw on the P8Z77-I Deluxe.  What was not predicted is the SupremeFX Impact – a long extensive card for the IO with SupremeFX style audio.  In this card we get the SupremeFX shielding, high-end filter caps and headphone amplifiers, much like the Formula.

The Impact also has the mini-PCIe combo card, and I am in the process if this is a model for users’ own WiFi or if it is the same as the Formula.  We also get an additional card for the rear IO with integrated two-digit debug, power/reset buttons and a Clear_CMOS button.

No word on pricing or release date for either model, but I would expect within a month or two for both to hit the shelves.

Comments Locked


View All Comments

  • sherlockwing - Tuesday, June 4, 2013 - link

    The "armor" is for protecting the board from dust & hot exhaust from Dual or Triple Fan cooled GPU.
  • stargater1 - Tuesday, June 4, 2013 - link

    Actually, I have seen the PCB on some GPUs flex and bend from the weight. You have to remember you only have the PCIe and one little screw, basically suspending it in mid air. And as for weight, lets look at the GTX Titan which is roughly 3lbs. Weight of a gtx 690 was roughly 4lbs. Weight of a gtx 780 is roughly the same as a Titan. May not seem like much, but in terms of being suspended like that, it is.
  • IanCutress - Tuesday, June 4, 2013 - link

    The armor is on the rear as well as a steel plate, designed to stop the board from warping when using a large GPU. The motherboard will start to warp from the weight before the PCIe connector snaps.
  • Emad - Thursday, June 13, 2013 - link

    Hi Ian,

    I'm not sure whether it's just me and I may be wrong but from what I see the armor is lacking the fan like they did to the Sabertooth armor. So, the question is do they design Maximus VI Formula strictly for water cooling? Or a good airflow is sufficient as long as you don't oc the mobo? I'm not a fan of water cooling. What's your opinion on this?
  • JeremyHill - Sunday, July 28, 2013 - link

    What your saying is true logically, but just to throw in my own experience here, I have actually had 2 Motherboards bend on me in the past 10 years. When I was a kid my parents bought a Dell, back when internet was brand new, 97 or 98 as I recall, and it came with one of those rinkydink 1/2 pound voodoo cards installed. over the course of 4 years it did somehow actually cause my mobo to bend a noticeable amount, perhaps 1/4" at the apex. Another one being my computer i built in 2010 using an old HP computer I had, I put a gtx480 inside and the same thing happened, about 1/4" bend.

    Having said that, the bend had zero affect on the performance of my PC, and didnt bother me at all because I couldnt see it. Also whose to say it was cause by the GPU? could have been manufacturing defects I just didnt notice until then. Regardless the armor looks pretty dope and it helps keep the Mobo cooler, assuming a cooler mobo even increases performance by a nominal ammount, so i vote +1 on the formula, I'm personally getting it over the hero for my next build, as well as a second Titan for 2xSLI
  • Brian Klug - Tuesday, June 4, 2013 - link

    Was this supposed to be a pipeline post?

  • dishayu - Tuesday, June 4, 2013 - link

    Since when are sounds like engine sound, footsteps and gunshots high frequency? :\
  • A5 - Tuesday, June 4, 2013 - link

    Shhhhh. Don't let facts get in the way of their pig lipstick.
  • iamkyle - Friday, June 7, 2013 - link

    WIMA MKS2 and ELNA Cerafine, which are the caps they use here, and widely considered some of the best audio-grade caps you can put in at those capacitance values. While the marketing may be off, the engineering behind it isn't.
  • daos - Friday, July 19, 2013 - link

    Thank you!

Log in

Don't have an account? Sign up now