LRDIMMs, RDIMMs, and Supermicro's Latest Twin
by Johan De Gelas on August 3, 2012 4:45 AM EST- Posted in
- IT Computing
- Intel
- Samsung
- Xeon
- Cloud Computing
- Supermicro
Investigating VM performance
The performance per VM can tell us much more. Even if our test is too CPU oriented, investing in more memory clearly pays off. ESXi is very efficient in allocating memory. There was for example 3GB of RAM ("Memory Shared Common") that was saved by Transparant Page Sharing.
Nevertheless, the pressure on the memory system caused the SQL Server VM to crawl. Throughput plunged to one third. As a result the Zimbra VM benefited from the lower CPU usage of MS SQL 2008 and performance increased. This is another sign that our test is a bit too CPU oriented. But still, even this corner case scenario is telling us much, especially if we check out the latency numbers.
The latency impact was even worse. The MSSQL server response time was on average four times higher. Even more interesting is our LAMP site. Throughput remained the same, but response times were 3.5 times higher than with two tiles. The more spacious LRDIMM Supermicro server saw the response time double in the worst case.
Facebook
Twitter
RSS
26 Comments
View All Comments
koinkoin - Friday, August 3, 2012 - link
For HPC solutions I like the Dell C6220, dense, and with 2 or 4GB of memory per cpu core you get a good configuration in a 2U chassis for 4 servers.But for VMware, servers like the R720 give you more room to play with memory and IO slots.
Not counting that those dense server don’t offer the same level of management and user friendliness.
JohanAnandtech - Friday, August 3, 2012 - link
A few thoughts:1. Do you still need lots of I/O slots now that we can consolidate a lot of gigabit Ethernets in Two 10GBe
2. Management: ok, a typical blade server can offer a bit more, but the typical remote management solutions that Supermicro now offers are not bad at all. We have been using them for several years now.
Can you elaborate what you expect from the management solution that you won't expect to see in a dense server?
alpha754293 - Friday, August 3, 2012 - link
re: network consolidationNetwork consolidation comes at a cost premium. You can still argue that an IB QDR will give you better performance/bandwith, but a switch is $6k and other systems that don't have IB QDR built in, it's about $1k per NIC. Cables are at least $100 a piece.
If you can use it and justify the cost, sure. But GbE is cheap. REALLY REALLY cheap now that it's been in the consumer space for quite some time.
And there aren't too many cases when you might exceed GbE (even the Ansys guys suggest investing in better hardware rather than expensive interconnects). And that says a LOT.
re: management
I've never tried Supermicro's IMPI, but it looks to be pretty decent. Even if that doesn't work, you can also use 3rd party like logmein and that works quite well too! (Although not available for Linux, but there are Linux/UNIX options available out there as well).
Supermicro also has an even higher density version of this server (4x half-width, 1U DP blade node.)
JonBendtsen - Monday, August 6, 2012 - link
I have tried Supermicro IPMI, works nicely. I can power on/off the machine and let it boot from a .iso image I have on my laptop. This means that in case I have to boot from a rescue CD, then I do not even have to plug a CD drive into the machine. Everything can be done from my laptop, even when I am not in the office, or even the country.bobbozzo - Tuesday, August 7, 2012 - link
Can you access boot screens and the BIOS from the IPMI?For Linux, I use SSH (or VNC server), but when you've got memory or disk errors, etc., it's nice to see the BIOS screens.
Bob
phoenix_rizzen - Thursday, August 9, 2012 - link
Using either the web interface on the IPMI chip itself, or the IPMIView software from SuperMicro, you get full keyboard, mouse, console redirection. Meaning, you can view the POST, BIOS, pre-boot, boot, and console of the system.You can also configure the system to use a serial console, and configure the installed OS to use a serial console, and then connect to the serial console remotely using the ipmitool program.
The IPMI implementation in SuperMicro motherboards (at least the H8DG6/H8DGi series, which we use) is very nice. And stable. And useful. :)
ForeverAlone - Friday, August 3, 2012 - link
Only 128GB RAM? Unacceptable!Guspaz - Monday, August 20, 2012 - link
It starts to matter more when you're pouring on the VMs. With two sockets there, you're talking 16 cores, or 32 threads. That's the kind of machine that can handle a rather large number of VMs, and with only 128GB of RAM, that would be the limitation regarding how many VMs you could stick on there. For example, if you wanted to have a dedicated thread per VM, you're down to only 4GB per VM, which is kind of low for a server.darking - Friday, August 3, 2012 - link
I think the price on the webpage is wrong. or atleast it differs by market.i just checked the Danish and the British webstores, and the 32GB LRDIMMS are priced at around 2200$ not the 3800$ that the US webpage has.
JohanAnandtech - Friday, August 3, 2012 - link
They probably changed it in the last few days as HP as lowered their price to $2000 a while ago. But when I checked, it was $3800