ABOUT BENCH FORUMS PODCAST LOGIN REGISTER
PC Components
Smartphones & tablets
Systems
ENTERPRISE & IT
GUIDES

Looking Back Pt. 2: X800 & Catalyst Under The Knife

 by Ryan Smith on February 22, 2006 12:05 AM EST
24 Comments | Add A Comment
24 Comments
Half-Life 2

There’s little that can be said about Half-Life 2 that hasn’t already been said, other than that perhaps Valve put the game’s graphics to a point where the gritty, depressing world of Half-Life was a little too well done. It’s not a tropical paradise, and it’s not one large monster closet, but Half-Life 2 is unique among first-person shooters for what it does with putting players in the middle of a crumbling city. It is for this reason that the game offers a good take on another aspect of performance.

Half-Life 2

Half-Life 2 HQ

With the excitement over this title both before and after it launched, the performance graphs aren’t really surprising here. ATI needed to optimize for this title as they could, and while it’s a bit unusual compared to all of the other shooters tested today to see a gradual performance increase versus one large increase, it’s still a moderate performance increase overall. Of course, since the Source engine was being used in Counter-Strike: Source a few months before Half-Life 2 was released, ATI had the chance to get a jump on optimizing for the engine before the game’s release (and hence, our use of the oldest drivers), so we can’t fully quantify all of the optimizations that ATI made in their drivers for this game.

Here again, we also see some more aggressive performance improvements in the case of AA/AF than without.


Catalyst 4.05 versus 6.01 (mouse over to see 4.05)

If it wasn’t for the fog and water around in the background, we’d have never been able to tell these screenshots apart. There is clearly no change in image quality in spite of the performance improvement seen, which is exactly what we want to find (or rather, not find).
Doom 3 Battlefield 2
PRINT THIS ARTICLE
Comments Locked

24 Comments

View All Comments

  • lombric - Thursday, February 23, 2006 - link

    It may be interesting to see the evolution in cpu discharge under various video format and in image quality.

    I know that the introduction of AVIVO in recents drivers was very efficient for the X1xx serie but what about the R420? No chance to have similar results?

  • Egglick - Friday, February 24, 2006 - link

    As far as I know, the X1x00 cards are the only ones with AVIVO, or at least the entire feature set.


    So does that mean that a $80 X1300 has better video playback than a X850XT PE?? Yep.

  • pkw111 - Thursday, February 23, 2006 - link

    ... but their conclusion is rather boring. True it may be good solid research, but how about some studies that give colorful results, liek comparing the non-offical ATI drivers, such as WarCat, Omega, ngo, etc.

  • Egglick - Thursday, February 23, 2006 - link

    I think it's a little too early to make guesses about the R5xx series right now. Don't forget that both the X800Pro and the 9700Pro are R300 based, and what we're looking at is a cumulation of 3+ years of tweaking and optimizing. The R580 has been out for what, a month?

    We could still see very radical performance boosts for R5xx based cards, particularly the R580 with it's unique shader architecture. It's also possible that performance boosts in new games will be even larger once the successive driver has been optimized for it. Basically, it's a whole new architecture, and what may have been true for both of these R300 based cards may not be true at all for R5xx.

    Also, the CCC is garbage. Boo to ATI for forcing us to use it.

  • DieBoer - Thursday, February 23, 2006 - link

    I just wish ati would stop wasting time on optimising 3dmark and start with games. No serious gamer would take notice at all at 3dm scores only the average joe.

  • Spoelie - Thursday, February 23, 2006 - link

    The most horrifying thing about CCC is the horrendous memory usage. I had been using the normal control panel all this time but recently formatted and downloaded the latest drivers. WindowsXP's memory usage after bootup went from ~70 something (not much had been installed yet) to a full fledged 200mb!! Only from installing the f*cked up driver.

    After some tweaking (disabling all ATi's added services and the CCC entry in the registry's startup) I'm back at around ~95mb after startup, which I was at before the format.

    Still find it incredible in what kind of default configuration the CCC 'ships'.

  • Questar - Thursday, February 23, 2006 - link

    Your saw rhings that weren't there - XP's footprint is much larger than 70MB.

  • Spoelie - Friday, February 24, 2006 - link

    Not really, once you start tweaking and don't have all programs installed, around 70 is really not that much of a stretch without programs open. Even so, even if the task manager for some reason is lying about the absolute numbers, there was a difference of 130mb just by installing a driver.

  • abhaxus - Wednesday, February 22, 2006 - link

    i find it surprising that you did not run the test with a dual core CPU to see if the dual core optimizations actually did anything in the new drivers. i know there was a writeup on them awhile back with the 5.12s i believe but i'd like to see if newer versions got any further improvement.

  • SonicIce - Wednesday, February 22, 2006 - link

    You can create a short 300 frame timedemo for Farcry and play it back with the http://www.hardwareoc.hu/index.php/p/download/st/....">Farcry bench tool in screenshot mode. This will give you perfectly consistant results. I did it once to compare the shadows on the weapon.
Copyright © 2024. All rights reserved.
BENCH
TOPICS
FOLLOW
ABOUT

Log in

Don't have an account? Sign up now