The Wiper Tool

The only Microsoft OS with TRIM support is Windows 7. Windows XP and Vista users are out of luck when it comes to TRIM, even if your drive supports it, the OS will never send it the command. Luckily there’s a workaround, one first popularized by Indilinx - not Intel. Kudos to the Indilinx guys.

It’s called the Indilinx Wiper Tool.

The tool asks the OS for all available LBAs (free space as far as the OS is concerned), then feeds the list to the SSD and tells the drive to TRIM those LBAs - prioritizing them for cleaning. It shouldn’t touch valid data, the key word being shouldn’t. Once cleaned, with no existing data in those blocks, performance goes back to its new state.

It’s a very simple solution actually. TRIM works because the OS knows when a file is deleted and it uses the TRIM command to inform the SSD of the deletion. Don’t have OS level TRIM support? Well, just run a tool that asks the OS what locations aren’t in use any longer. You get the same result, it just takes one extra step: running the wiper tool.


See wiper.dat? It's eating up all available LBAs then telling the controller to TRIM those blocks. Clever.

I tested the Wiper Tool to make sure it worked as promised and indeed it did, I actually showed you the results at the beginning of this story. One pass of the tool and the drive went from used to new performance:

PCMark Vantage HDD Score New "Used" After TRIM/Idle GC % of New Perf
OCZ Vertex Turbo (Indilinx MLC) 26157 25035 26038 99.5%

 

You’ll need to get the tool from your drive vendor and it currently works under both 32-bit and 64-bit Windows OSes (XP through 7). I found that it works best in IDE mode; with your controller set to RAID or AHCI I’ve seen issues where the manual trim process can easily take more than several hours. When running properly it takes a couple of minutes to trim an entire drive.

You don’t need to run the tool that often (Indilinx drives don’t drop significantly in real world performance anyway) and once we get official TRIM support, Windows 7 users won’t need to do anything at all. But until then it does provide a nice way to keep your drive fresh.

All Indilinx Drives Are Built Alike Impact of Idle Garbage Collection
Comments Locked

295 Comments

View All Comments

  • Anand Lal Shimpi - Monday, August 31, 2009 - link

    Intel insists it's not an artificial cap and I tend to believe the source that fed me that information.

    That being said, if it's not an artificial cap it's either:

    1) Designed that way and can't be changed without a new controller
    2) A bug and can be fixed with firmware
    3) A bug and can't be fixed without a new controller

    Or some combination of those items. We'll see :)

    Take care,
    Anand
  • Adul - Monday, August 31, 2009 - link

    Another fine article anand :). Keep up the good work.
  • CurseTheSky - Monday, August 31, 2009 - link

    This is absolutely the best article I've read in a very long time - not just from Anandtech - from anywhere.

    I've been collecting information and comparing benchmarks / testimonials for over a month, trying to help myself decide between Intel, Indilinx, and Samsung-based drives. While it was easy to see that one of the three trails the pack, it was difficult to decide if the Intel G2 or Indilinx drives were the best bang for the buck.

    This article made it all apparent: The Intel G2 drives have better random read / write performance, but worse sequential write performance. Regardless, both drives are perfectly acceptable for every day use, and the real world difference would be hardly noticeable. Now if only the Intel drives would come back in stock, close to MSRP.

    Thank you for taking the time to write the article.
  • deputc26 - Monday, August 31, 2009 - link

    been waiting months for this one.
  • therealnickdanger - Monday, August 31, 2009 - link

    Ditto! Thanks Anand! Now the big question... Intel G2 or Vertex Turbo? :) It's nice to have options!
  • Hank Scorpion - Monday, August 31, 2009 - link

    Anand,

    YOU ARE A LEGEND!!! go and get some good sleep, thanks for answering and allaying my fears... i appreciate all your hard work!!!!

    256GB OCZ Vertex is on the top of my list as soon as a validated Windows 7 TRIM firmware that doesnt need any work by me is organized....

    once a firmware is organised then my new machine is born.... MUHAHAHAHAHAHA
  • AbRASiON - Monday, August 31, 2009 - link

    Vertex Turbo is a complete rip off, Anand clearly held back saying it from offending the guy at OCZ.
    Now the other OCZ models however, could be a different story.
  • MikeZZZZ - Monday, August 31, 2009 - link

    I too love my Vertex. Running these things in RAID0 will blow your mind. I'm just waiting for some affordable enterprise-class drives for our servers.

    Mike
    http://solidstatedrivehome.com">http://solidstatedrivehome.com
  • JPS - Monday, August 31, 2009 - link

    I loved the first draft of the Anthology and this is a great follow-up. I have been running a Vertex in workstation and laptop for months know and continue to be amazed at the difference when I boot up a comparable system still running standard HDDs.
  • gigahertz20 - Monday, August 31, 2009 - link

    Another great article from Anand, now where can I get my Intel X-25M G2 :)

Log in

Don't have an account? Sign up now