The SSD Relapse: Understanding and Choosing the Best SSD
by Anand Lal Shimpi on August 30, 2009 12:00 AM EST- Posted in
- Storage
Used vs. New Performance: Revisited
Nearly all good SSDs perform le sweet when brand new. None of the blocks have any data in them, each write is performed at full speed, all is bueno. Over time, your drive gets written to, all blocks get occupied with data (both valid and invalid) and now every time you write to the SSD its controller has to do that painful read modify write and cleaning.
In the Anthology I simulated this worst used case by first filling the drive with data, deleting the partition, then installing the OS and running my benchmarks. This worked very well because it filled every single flash block with data. The OS installation and actual testing added a few sprinkles of randomness that helped make the scenario even more strenuous, which I liked.
The problem here is that if a drive properly supports TRIM, the act of formatting the drive will erase all of the wonderful used data I purposefully filled the drive with. My “used” case on a drive supporting TRIM will now just be like testing a drive in a brand new state.
To prove this point I provide you with an example of what happens when you take a drive supporting TRIM, fill it with data and then format the drive:
| SuperTalent UltraDrive GX 1711 | 4KB Random Write IOPS |
| Clean Drive | 13.1 MB/s |
| Used Drive | 6.93 MB/s |
| Used Drive After TRIM | 12.9 MB/s |
Oh look, performance doesn’t really change. The cleaning process takes longer now but other than that, the performance is the same.
So, I need a new way to test. It’s a shame because I’m particularly attached to the old way I tested, mostly because it provides a very stressful situation for the drives to deal with. After all, I don’t want to fool anyone into thinking a drive is faster than it is.
Once TRIM is enabled on all drives, the way I will test is by filling a drive after it’s been graced with an OS. I will fill it with both valid and invalid data, delete the invalid data and measure performance. This will measure how well the drive performs closer to capacity as well as how well it can TRIM data.
Unfortunately, no drives properly support TRIM yet. The beta Indilinx firmware with TRIM support works well, unless you put your system to sleep. Then there’s a chance you might lose your data. Woops. There’s also the problem with Intel’s Matrix Storage Manager not passing TRIM to your drives. All of this will get fixed before the end of the year, but it’s just a bit too early to get TRIM happy.
What we get today is the first stage of migrating the way we test. In order to simulate a real user environment I take a freshly secure erased drive, install Windows 7 x64 on it (no cloning, full install this time), then install drivers/apps, then fill the remaining space on the drive and delete it. This fills the drive with invalid data that the drive must keep track of and juggle, much like what you'd see by simply using your system.
I’m using the latest IMSM driver so TRIM doesn’t get passed to the drives; I’m such a jerk to these poor SSDs.
I’ll start look at both new and used performance on the coming pages. Once TRIM gets here in full force I’ll just start using it and we won't have to worry about looking at new vs. used performance.
The Test
| CPU | Intel Core i7 965 running at 3.2GHz (Turbo & EIST Disabled) |
| Motherboard: | Intel DX58SO (Intel X58) |
| Chipset: | Intel X58 |
| Chipset Drivers: | Intel 9.1.1.1015 + Intel IMSM 8.9 |
| Memory: | Qimonda DDR3-1066 4 x 1GB (7-7-7-20) |
| Video Card: | eVGA GeForce GTX 285 |
| Video Drivers: | NVIDIA ForceWare 190.38 64-bit |
| Desktop Resolution: | 1920 x 1200 |
| OS: | Windows 7 x64 |
Facebook
Twitter
RSS
295 Comments
View All Comments
Anand Lal Shimpi - Monday, August 31, 2009 - link
I believe OCZ cut prices to distributors that day, but the retail prices will take time to fall. Once you see X25-M G2s in stock then I'd expect to see the Indilinx drives fall in price. Resellers won't give you a break unless they have to :)Take care,
Anand
bobjones32 - Monday, August 31, 2009 - link
Another great AnandTech article, thanks for the read.Just a head's-up on the 80GB X-25m Gen2 - A day before Newegg finally had them on sale, they bumped their price listing from $230 to $250. They sold at $250 for about 2 hours last Friday, went back out of stock until next week, and bumped the price again from $250 to $280.
So....plain supply vs. demand is driving the price of the G2 roughly $50 higher than it was listed at a week ago. I have a feeling that if you wait a week or two, or shop around a bit, you'll easily find them selling elsewhere for the $230 price they were originally going for.
AbRASiON - Monday, August 31, 2009 - link
Correct, Newegg has gouged the 80gb from 229 to 279 and the 160gb from 449 to 499 :(Stan Zaske - Monday, August 31, 2009 - link
Absolutely first rate article Anand and I thoroughly enjoyed reading it. Get some rest dude! LOLJaramin - Monday, August 31, 2009 - link
I'm wondering, if I were to use a low capacity SSD to install my OS on, but install my programs to a HDD for space reasons, just how much would that spoil the SSD advantage? All OS reads an writes would still be on the SSD, and the paging file would also be there. I'm very curious about the amount of degradation one would see relative to different use routines and apps.Anand Lal Shimpi - Monday, August 31, 2009 - link
Putting all of your apps (especially frequently used ones) off of your SSD would defeat the purpose of an SSD. You'd be missing out on the ultra-fast app launch times.Pick a good SSD and you won't have to worry too much about performance degradation. As long as you don't stick it into a database server :)
Take care,
Anand
swedishchef - Tuesday, September 1, 2009 - link
What if you just put your photoshop cache on a pair of Velociraptors? Would it be the same loss of benefit?I have the same question regarding uncompressed HD video work, where I need write speeds well over the Intel x25-m ( over 240Mb/s). My assumption would be that I could enjoy the fast IO and App. launch of an SSD and increase CPU performance with the SSD while keeping the files on a fast external or internal raid configuration.
Thank you again for a a brilliant Article Anand.
I have been waiting for it for a long time. Yours are the only calm words out on the net.
Grateful Geek /Also professional image creator.
creathir - Monday, August 31, 2009 - link
Great article Anand. I've been waiting for it...My only thoughts are, why can't Intel get their act together with the sequential business? Why can the others handle it, but they can't? To have such an awesome piece of hardware have such a nasty blemish is strange to me, especially on a Gen-2 product.
I suppose there is some technical reason as to why, but it needs to be addressed.
- Creathir
Anand Lal Shimpi - Monday, August 31, 2009 - link
If Intel would only let me do a deep dive on their controller I'd be able to tell you :) There's more I'd like to say but I can't yet unfortunately.Take care,
Anand
shotage - Monday, August 31, 2009 - link
Awesome article!I'm intrigued with the cap on the sequential reads that Intel has on the G2 drives as well. I always thought it was strange to see even on their first gen stuff.
I'm assuming that this cap might be in place to somehow ensure the excellent performance they are giving with random read/writes. All until TRIM finally shows up and you'll have to write up another full on review (which I eagerly await!).
I can't wait to see what 2010 brings to the table. What with the next version of SATA and TRIM just over the horizon, I could finally get the kind of performance out of my PC that I want!!