Mushkin 2GB Redline XP4000
Mushkin is a very well-known brand of Enthusiast memory. Most computer hobbyists know Mushkin for their web-based direct memory sales, based in Denver, CO. Direct sales have always been a large part of Mushkin's business, but today, you can buy Mushkin memory at Newegg and other web e-tailers as well.
Several months ago, Mushkin introduced their new Redline heatspreader. With large slots in the top of the heatspreader, it was designed to better dissipate heat than the older closed heatspreaders, which often caused higher temperatures than no heatspreader at all.
Specifications
Mushkin rates their DDR500 2GB Redline kit at 3-3-2 timings at DDR500. Those are exactly the timings that we would expect with Infineon C die memory.
Voltage is rated at standard 2.6V, so you will not need a board with super high vCore to get the most from these memory chips.
Test Results
To be considered stable for test purposes, Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration.
The performance of the Mushkin Redline was typically Infineon C, except it was always at the better end of expected C die performance. Mushkin managed DDR436 at CAS2, where some other Infineon chip memory requires CAS2.5. Even at the very top, the Redline ran with complete stability at 3-3-2 timings and never required more than 2.8V for best performance.
The highest overclock with Mushkin Redline was an outstanding DDR586 - the highest overclock of any Infineon based 2GB kit in this review. In fact, only the impossible to buy Crucial Ballistix could reach further. All-in-all, Mushkin Redline was a top performer, achieving the kind of performance and overclocking that will likely satisfy even the most jaded new user of 1 GB DIMMs. Mushkin, like OCZ in Part 1 of the 2GB kit roundup, makes the most of the memory chips used in their memory kits. Effective binning and good quality assurance pay off in a consistent, high-performing 2GB memory kit.
Mushkin is a very well-known brand of Enthusiast memory. Most computer hobbyists know Mushkin for their web-based direct memory sales, based in Denver, CO. Direct sales have always been a large part of Mushkin's business, but today, you can buy Mushkin memory at Newegg and other web e-tailers as well.
Several months ago, Mushkin introduced their new Redline heatspreader. With large slots in the top of the heatspreader, it was designed to better dissipate heat than the older closed heatspreaders, which often caused higher temperatures than no heatspreader at all.
Specifications
Mushkin rates their DDR500 2GB Redline kit at 3-3-2 timings at DDR500. Those are exactly the timings that we would expect with Infineon C die memory.
| Mushkin 2GB Redline XP4000 Memory Specifications | |
| Number of DIMMs & Banks | 2 DS |
| DIMM Size Total Memory |
1GB 2GB |
| Rated Timings | 3-3-2-8 at DDR500 |
| Rated Voltage | Standard (2.6V) Voltage |
| SPD | 3-3-2-8 |
Voltage is rated at standard 2.6V, so you will not need a board with super high vCore to get the most from these memory chips.
Test Results
| Mushkin 2GB Redline XP4000 (DDR500) - 2x1GB Double-Bank | |||||||
| CPU Ratio at 2.4GHz | Memory Speed |
Memory Timings & Voltage |
Quake3 fps |
Sandra UNBuffered | Sandra Standard Buffered |
Super PI 2M places (time in sec) |
Wolfenstein - Radar - Enemy Territory fps |
| 12x200 | 400DDR | 2-3-2-7 2.5V |
538.5 | INT 2516 FLT 2658 |
INT 6027 FLT 6027 |
82 | 117.5 |
| 11x218 | 436DDR | 2-3-2-7 2.7V |
545.0 | INT 2687 FLT 2831 |
INT 6448 FLT 6375 |
81 | 118.5 |
| 10x240 | 480DDR | 2.5-3-2-7 2.6V |
549.0 | INT 2852 FLT 3017 |
INT 6721 FLT 6651 |
80 | 119.6 |
| 9x267 | 533DDR | 3-3-2-7 2.7V |
557.3 | INT 3090 FLT 3165 |
INT 7005 FLT 6923 |
80 | 120.8 |
| 9x293 (2.64GHz) |
Highest Mem Speed DDR 586 |
3-3-2-7 2.8V |
593.0 | INT 3299 FLT 3536 |
INT 7658 FLT 7548 |
73 | 129.6 |
The performance of the Mushkin Redline was typically Infineon C, except it was always at the better end of expected C die performance. Mushkin managed DDR436 at CAS2, where some other Infineon chip memory requires CAS2.5. Even at the very top, the Redline ran with complete stability at 3-3-2 timings and never required more than 2.8V for best performance.
The highest overclock with Mushkin Redline was an outstanding DDR586 - the highest overclock of any Infineon based 2GB kit in this review. In fact, only the impossible to buy Crucial Ballistix could reach further. All-in-all, Mushkin Redline was a top performer, achieving the kind of performance and overclocking that will likely satisfy even the most jaded new user of 1 GB DIMMs. Mushkin, like OCZ in Part 1 of the 2GB kit roundup, makes the most of the memory chips used in their memory kits. Effective binning and good quality assurance pay off in a consistent, high-performing 2GB memory kit.
Facebook
Twitter
RSS
51 Comments
View All Comments
DonPMitchell - Monday, March 6, 2006 - link
I'm surprised there was no discussion of single-rank vs. dual-rank memory. For the Athlon, that's a big issue, becuase its memory controller may down-clock beyond 4 ranks of memory.nyogen - Wednesday, February 15, 2006 - link
I remember when Nvidia released their 6xxx series there was an all out boycott of paper launches.OCZ and Mushkin released not very long ago their 2GB dual channel high end kits namely:
http://www.mushkin.com/doc/products/memory_detail....">http://www.mushkin.com/doc/products/memory_detail....
http://www.ocztechnology.com/products/memory/ocz_e...">http://www.ocztechnology.com/products/memory/ocz_e...
Apart from these parts not having been available, the new batch that carries only the name given by reviews are flagged by poor performance, different IC's from the original batch, and lots of glitches.
I am sure Corsair and all the other manufacturers are doing the same, paper launch, hard launch cherry picked and then selling out to unsuspecting customers a COMPLETELY different product, backed by reputable reviews.
Don't you feel like they have been using you and used your reputation and popularity in order to commit something very close to fraud ???
If you encourage us to buy these products then you have the responsability to follow up on the products life and batches so that once they try to do this again you will be there to sanction this and PROTECT US. Otherwise your reviews become fairy tales and the only ones that have the reviewed products are you and a couple of people in the world.
GO FOR THEM ! END THIS UNFAIR PRACTICE !
Overlag - Monday, February 6, 2006 - link
Crucial have infact stopped making there 1gig DDRI sticks due to the massive fail rate on there high end products.i have had 6x 512mb failures and 4x 1gig failures. While there customer services is the best of ANY online company ive dealt with, there high end products are really bad quality now.... the ram overheats, then after a few months wont run at 1t, then it starts making noises while you access it, before finaly degrading over a month from 2-2-2-6 settings down to 3-4-4-10 untill failing totaly.
This includes chips (my latest two) which ive been using at 2.7volts ONLY, and with active cooling, yet they are still hotter than my X2 4400 at 4800 speeds...Last week they run fine at 2-2-2-7 1t, now they are at 3-3-3-8 2t :(
... Why there high end products have problems i dont know, there normal or value ram runs fine for YEARS and YEARS.
Very disapointed with it all apart from the customer services. However even that has started to disapoint me, as they refused to RMA/refund me for my 2x 512mb pair...
leexgx - Monday, February 6, 2006 - link
i had no problems getting my ram RMAed and replaced (2 days ago 2 day turn around UK) never had something replaced so fast before :)you can still buy it from here (UK tho)
http://www.overclockers.co.uk/acatalog/Crucial_Dua...">http://www.overclockers.co.uk/acatalog/Crucial_Dua...
on an other note it is an consern to me as well i have never used ram that can heat my room (needs active cooling) like others have posted it does run hot if not cooled i cant seem to get to 2-2-2-7 T1 my asus a8n-sli prem does an anoying thing by auto setting it to 4 5 5 12 {fail safe maybe?}(when i open A64 tweeker as it shows the info) then the nvidia Sound or nvidia video tray Icon crashs the system with an nice BSOD, (works fine tho at 3-3-3-7 T1 @ ddr500 2.7v or ddr speed lower but just run it at ddr400 ish now)
an but realy any way good OCZ or just standered TwinMoss ram is realy real world 2-4% performance dif (Amd64 On chip ram contorler removes the bottle neck that was on the Older k7 chips i go for lower timeings over more bandwith)
realy should have an look at DFI streets Forums on the matter of ddr1 Ocing (AMD overclocking) http://www.dfi-street.com/forum/forumdisplay.php?f...">http://www.dfi-street.com/forum/forumdisplay.php?f...
(other note i think my ram was partly dead when i got it just put up with it untill me pc did not boot any more )
Overlag - Thursday, February 9, 2006 - link
i wouldnt want to buy ballistix ever again... Once this set finaly gives up the ghost i will ask for a full refund and get some real memory.XeCutor - Thursday, February 2, 2006 - link
My first pair failed memtest at 250mhz, seemed stable at 247mhz. My second pair does 250mhz but not much more. Fails at 255mhz. All this is on a DFI Expert board with an opteron 165 3-4-4-8 1T timings at 2,6-2,8v. Voltage doesn't seem to matter att all to these sticks, they fail at the same speeds regardless for me.bupkus - Wednesday, January 25, 2006 - link
I went for the Twinx2048-3200c2pt because of the lower timings and $197 AMIR price. I haven't researched this much lately, but I recall PC3200 with tight timings getting the nod from the enthusiast community for the Athlon 64.The TWINX2048-4000PT that I faced it off to lists timings of 3-4-4-8 which I thought wasn't preferable to the tighter timings especially with a price of $233.
The OCZ4002048ELDCPE-K is going for the same price of about $200 but the OCZ5001024EBPE only appears on newegg as a single 1GB module for $153.44 + $4.81 shipping.
That's too rich for my blood.
I guess the question for me would be which is the best for $200 +- $20?
Visual - Wednesday, January 25, 2006 - link
Besides the TWINX kit, corsair offers single 1GB modules too - again marked as 4000PTThe price for the kits for some reason seems higher than two separate modules.
So my question is, are the separate modules the same thing as what's in the kits? Why don't you mention them at all, and either recommend them for better value over the overpriced kits, or, if they dont perform as well, warn users about them?
Googer - Tuesday, January 24, 2006 - link
I would have liked to have seen four 512MB modules shown in the graphs as a refrence of how much or how little there is to gain by using these pairs of 1GB modules. By doing this I could form a cost/benefit analasys.bersl2 - Monday, January 23, 2006 - link
I'm going to wait to see if the price on DDR1 falls again before AMD goes DDR2. If it does, I'll get 2 x 1GiB to replace the 4 x 512MiB I bought over a year ago, but haven't been able to use until just now.