Thermal and Acoustics

Heat and sound are also two very important factors in drive performance especially when considering where they will be used. A loud hard drive that becomes warm very quickly may not be the best choice for home theater PCs or any PC without adequate cooling, and the noise alone could be a bit annoying. Take a look at how each drive performed as far as heat and noise output goes.

Thermal

Drive Operating Temperatures

Drive Operating Temperatures


Acoustics

To measure the sound output of each drive, we have taken decibel readings of each drive 1" away from the side at their startup phase as well as the sound output while there is disk activity.

Noise Comparison


Real World Tests - Game Level Load Times Final Words
Comments Locked

46 Comments

View All Comments

  • Visual - Saturday, December 3, 2005 - link

    i cant imagine what error would hang my drive for 8 seconds :/ and if it really happened, even in recoverable error, i'd not trust that drive again anyway. so it'd be better to mark it "failed"
  • Lakeshow - Saturday, December 3, 2005 - link

    Yeah I read that article on storagereview.com couple days after I got my WD4000YR and it kind of bothers me.

    Oh well, what are you gonna do? I absolutely love this drive. I can only hope this drive will live until my next voluntary upgrade.
  • Lifted - Friday, December 2, 2005 - link

    The HD Tach screenshots say "for non-commercial or evaluation use only, see license agreement."

    Hmmmmm. Anandtech is non-commercial?
  • Gannon - Friday, December 2, 2005 - link

    I'd like to see more tests done on drives that are at least 80% full because a lot of us pack our drives full of stuff and the performance we end up getting is when we've filled it. While these tests are good and all, I think they inflate the actual scores of how a drive is really used. No drive sits with just XP and a game or two and a couple of test files, that bias's the tests toward unrealistic use of how hard disks are used, especially big ones over 160GB. I fill my drives regularly and I have over 800GB needless to say I'm backing up stuff to DVD's just to have enough space to perform other operations.
  • WileCoyote - Friday, December 2, 2005 - link

    Why does everyone want Anandtech to benchmark their current system? Run your own benchmark if you want to know the speed of your hard-drive/computer. I think the articles here are perfect - they help me decide what to purchase in the future. I don't need an article to make me feel good about what I already have. I like the current format of articles that educate me on my next purchase.
  • johnsonx - Friday, December 2, 2005 - link

    time to cut down on the pron addiction
  • Olaf van der Spek - Friday, December 2, 2005 - link

    > We were also surprised to see the WD4000YR perform so well, since it is using the 1 st generation 1.5Gb/sec interface.

    That's a joke, right?
    I hope you weren't really expecting a significant performance improvement from a faster interface (300 mbyte/s instead of 150 mbyte/s while HDD's are more near 75 mbyte/s and only during seqential access).
  • bob661 - Friday, December 2, 2005 - link

    I think the interface increases benefit RAID performance more than singledrive performance.
  • Olaf van der Spek - Friday, December 2, 2005 - link

    I don't think so, as (without involvement of port multipliers) SATA is a point to point architecture.
  • yacoub - Friday, December 2, 2005 - link

    Or you can go buy a pair of 200GB Samsung SpinPoint SP2004C drives for under $100 each and have a much quieter drive setup. :)

Log in

Don't have an account? Sign up now