Hardware Setup and Platform Analysis

The internal components of the 4X4 BOX-V1000M are packed densely together. The front panel's two USB 2.0 ports are enabled by a daughterboard connecting to the motherboard's USB 2.0 headers. The mounting for this daughterboard, and the SATA port / cable location make the installation of the DDR4 SODIMMs a challenging process. In fact, based on my experience, it is better to completely take out the daughterboard prior to the SODIMM installation process. Installing a 2.5" drive is fortunately not as painful, as it is similar to the installation process in the tall NUCs from Intel, and the SATA cable is already in place inside the chassis.

(Annotation on photograph sourced from Hermitage Akihabara)

The rest of the internal components are the usual suspects in a NUC targeting industrial applications - a Realtek ALC233 audio codec, an Exar SP339E serial port transceiver, and a couple of Raltek RTL8111G gigabit Ethernet controllers on one side, and a 60mm fan on top of a copper heat sink on the other side.

Once the build components were in place, it was a fairly uneventful process to complete the OS installation. The UEFI BIOS of the 4X4 BOX-V1000M is quite basic - consumers used to ASRock's fancy GUI and plethora of value additions are bound to be disappointed with the spartan AMI BIOS interface in this ASRock Industrial system. The gallery below shows the various available BIOS options.

The block diagram of the Ryzen Embedded V-Series SoC is presented below.

The V1605B specifically provides:

  • 2x 10GbE
  • 1x USB 2.0
  • 1x USB 3.1 Gen1
  • 4x USB 3.1 Gen2
  • 2x SATA III

The 4X4 BOX-V1000M does not use the 10GbE interfaces. It also uses the single USB 2.0 port of the SoC to drive a header on the board that enables a daughterboard downstream to provide 2x USB 2.0 ports in the front panel. The USB 3.2 Gen 1 port and one of the USB 3.1 Gen 2 ports of the SoC are left unused. Networking support is provided using PCIe lanes.

The AIDA64 system report for our 4X4 BOX-V1000M configuration provides a breakdown of the usage of the PCIe lanes and adds additional context to the above block diagram:

  • PCIe 3.0 x4 and a SATA port multiplexed behind the M.2 2242/2260 slot
  • PCIe 3.0 x1 for the Intel Wireless-AC AC3168 WLAN card
  • PCIe 3.0 x1 for the Realtek RTL8111G #1
  • PCIe 3.0 x1 for the Realtek RTL8111G #2

The absence of a discrete PCH means that there is no 'DMI bottleneck' at play in the SoC. Another interesting aspect is the support for four simultaneous 4Kp60 display outputs from the V1605B. The 4X4 BOX-V1000 only supports three, though, with two DP 1.2a ports and a HDMI 2.0a port.

In the remainder of this review, we will first look at various UL benchmarks, followed by miscellaneous workloads. A detailed look at the HTPC credentials of the system is followed by testing of the power consumption and thermal solution. In our recent system reviews, we have usually started off with BAPCo's SYSmark 2018 - unfortunately, we ran into some showstopper issues with the 4X4 BOX-V1000M review configuration, as the benchmark program consistently errored out (mostly during the Photoshop CC workload component). We had seen similar problems in previous AMD-based PCs that ended up getting resolved with driver updates, but we had no such luck with this system. Incidentally, with the same GPU drivers, we were able to get the workload processed correctly on an ECS LIVA A320 sporting an AMD Athlon 3000G processor. Debugging the issue on the 4X4 BOX-V1000M beyond a few attempts was beyond the scope of this review. Hence, we decided to drop the attempt to publish SYSmark 2018 numbers for the 4x4 BOX-V1000M. 

Introduction and Product Impressions UL Benchmarks - PCMark and 3DMark
Comments Locked


View All Comments

  • eastcoast_pete - Monday, September 28, 2020 - link

    Forgot to ask: how noisy is it, and how whiny is the fan?
  • nicolaim - Monday, September 28, 2020 - link

    Article says it's noisy.
  • jabber - Tuesday, September 29, 2020 - link

    I bought masses of their quad core Atom/Nvidia GPU based ION boxes 10 years ago for folks and most of them are still working with later SSD/RAM upgrades. This looks like a decent replacement.
  • ivanovitch_k - Tuesday, September 29, 2020 - link

    lol at the included CD, larger than the unit itself :D !

    When will mfg. do away with those factory-to-trash cederoms... ?
  • philtroy - Thursday, August 12, 2021 - link


    I am trying to find m.2 drives that will fit this and am having difficulty. I am wondering whether B + M M.2 drives will fit in M sockets (which is what I understand the 4X4 BOX-V1000M has). Interestingly, when I tried to find the drive discussed in the article, it appears also to be a B + M drive. (I am looking at the Transcend 256GB, M.2 2242 SSD, SATA3 B+M Key, TLC (TS256GMTS430S) which I found on amazon.ca for around CAD $70.00)

    Also, any suggestions for ram. Obviously there ar a lot of choices. I wish to have 16gb, so presumably 2x8GB is what I am looking for. Does the brand matter or do I just look for one with four to 5 stars.

    Thanks . . .

  • philtroy - Thursday, August 12, 2021 - link

    P.S. I am also wondering whether I can buy one 16GB memory device rather than two 8 gb devices, in case I decide to upgrade later.



Log in

Don't have an account? Sign up now