Ahead of the annual Supercomputing 2018 conference next week, Intel is today announcing part of its upcoming Cascade Lake strategy. Following on from its server-focused Xeon Scalable Skylake family, Intel has already pre-announced that Cascade Lake-SP will form the next generation, with a focus on compute and security. Today’s announcement is for a product family to run alongside Cascade Lake-SP, called Cascade Lake-AP, or Cascade-AP for short. Cascade-AP is going to be aimed at ‘advanced performance’. In order to implement this new processor family, Intel is combining multiple chips in the same package.

Scaling up to 48-Cores Per CPU

Intel is still keeping a lot of details for Cascade-AP under wraps for now, but what we do know is some high level specifications: Cascade-AP processors will be up to 48 cores, possibly with hyperthreading, and is aimed at dual socket servers, for a total of 96 cores in a 2S system. As a result, a single Cascade-AP is essentially a 2S Xeon setup on a single chip.

Each Cascade-AP processor will have 12 DDR4 DRAM channels, although maximum capacity of memory has not been announced. Connection between the processors will be the standard UPI connection as seen on current Xeon Scalable processors, although connection speed was not specified. It would appear that Cascade-AP is not designed to scale beyond a 2S system.

Each Cascade-AP lake processor will offer up to 48 cores, and in order to do this Intel is using a multi-chip package (MCP). At this point we believe that Intel is using two silicon dies in the package, specifically two ‘XCC’ dies which should be 28-core by design but will be only enabled up to 24-core per silicon die. Intel did confirm that these dies are connected by UPI over the package, and not with Intel’s EMIB technology. This is unfortunate, given how Intel has promoted its EMIB technology as an alternative to interposers, but we have yet to see it in a product that connects two high-powered chips together, as was originally envisioned when the technology was first announced. It does mean however that it can use the same silicon as will be found in the standard Xeon Scalable processors.

No information was given about TDP per processor, or pricing, PCIe lanes, memory capacity/support, frequencies, or variants. We were told that it will be launched at the same time as the full Cascade Lake family ‘in the first part of 2019’ (to directly quote). Intel did give some base performance numbers, suggesting that a processor scores 3.4x higher than an EPYC 7601 on Linpack and 1.3x higher on Stream Triad. Deep Learning inference, a major workload for these new parts, was quoted as scoring 17x the base Skylake-SP launch performance, which would be 1.55x the original quoted Cascade-SP launch performance with the new VNNI instructions.

Given the extra power requirements and extra memory requirements, we fully expect Intel to be using a new socket for this processor. Rather than LGA4367, with 4367-pins, there have been recent leaks suggesting that an LGA5903 socket be where Cascade-AP will end up, although Intel has not confirmed this. Intel did state that Cascade-AP will be shipping for revenue in Q3 2018 to its high-profile customers as part of its early access program, however widespread availability will be ‘in the first part of 2019’.

More Cores Per Socket, But Potentially a Worse 4S System

With this new type of processor, even given Intel’s previous competitive analysis of MCP designs, Intel is pushing up the number of cores per socket, and cores per 2S system. The 2S server market is one of Intel’s biggest across the whole company, and the idea is to offer more value. It’s hard to state the impact that Cascade-AP will have on the product portfolio, but it comes to mind that Intel is trying to condense a 4P system into a 2P system, though it probably won’t perform as well.

Take, for example, a 24-core 4P system, which has 96 cores total. Using Intel’s 3 UPI links, the communication between the four processors allows each processor to talk to each other processor in only one hop. Each processor has six channels of memory, access to 48 PCIe lanes, potential access to OmniPath, etc.

In a Cascade-AP two socket system, it all depends on how the links between the sockets are formed.

We already know that within a single package, the two silicon dies will talk to each other over UPI through the package. This is lower power than a socket-to-socket UPI link, and might take advantage of lower latency as well. That is all well and good.

But between the sockets is where questions will lie. If Intel is only using one UPI link between the sockets, then only one die from each socket will be connected. This is essentially a straight chain connectivity, meaning that to talk to a silicon die on the other socket, it may require two hops.

If Intel is using two UPI links between the sockets, then we have a situation similar to a Xeon Gold-2UPI system where the processors are arranged in a square and there is no cross-connection. This creates a communication imbalance between processors and memory which might be hard to predict unless the software can enumerate and deal with it effectively.

The other option is if Intel is using four UPI links between the sockets – two from each silicon die, to one each of the other silicon dies on the other processor. This is identical to a 4P 3UPI system, except that the dual socket configuration makes this all the more complex. It would require at least two UPI links to cross over each other with the traces on the motherboard. This either requires a thick motherboard (adds cost) or a control repeater chip that can do it easier. But even then, we’re dealing with a non-uniform memory architecture in each socket and between sockets with different latencies between the hops. At least in a natural 4S system, the arrangement can ensure latencies are equal.

There’s also the question of PCIe lanes. Intel has not given a number, but we suspect it to be anywhere between 48 (24 per die) or 96 (48 per die) per socket. Which would be identical to a 4S system again.

Further to that, a question of frequencies. A current 24-core Xeon Platinum runs at 205W. Intel is not going to put the TDP at 410W when it puts two together – it will have to lower the frequency to hit something more suitable for the large socket. Add into that the complexity of supplying 48 cores with enough power to be competitive. With separate chips, each socket can have higher frequencies.

The only saving grace here would be actual physical volume. Some datacenters are all about compute density, and for some providers looking to deploy mass x86 CPUs in their offering, this could be a winner with them. Intel has repeatedly cited that Xeon-based inference as a major source of customers, hence the inclusion of features like VNNI on Cascade Lake to help drive that market.

Timeline for Cascade Lake and Cascade Lake-AP

Intel stated that they are shipping processors for revenue to select customers as part of its early adopter program. The new parts will be launched in the first part of 2019, with the full Cascade Lake family (SP and AP) being launched at the same time. We asked a series of pertinent questions after our briefing, however Intel was unwilling to answer anything additional to our presentation. Some further information (or demonstrations) might be seen at the Supercomputing 2018 conference happening next week.

Comments Locked

91 Comments

View All Comments

  • coschizza - Monday, November 5, 2018 - link

    in the enterprise market nobody ever updates the CPU so it is irrelevant if the socket changes, in all my life of hundreds of servers in the datacenter I have never seen a cpu upgrade
  • mode_13h - Monday, November 5, 2018 - link

    You're missing the point. Socket changes mean more work for their partners and less opportunity to reap returns on their previous platform investments.
  • Spunjji - Tuesday, November 6, 2018 - link

    This x1000. The "customer" of Intel is not the end-user, it's system integrators. New gigantic socket for a comedy CPU = new boards with new layouts, new validation, new user guides and best practices, new diagnostics... plus this thing is gonna need god-knows how many layers in the motherboard's CB to accommodate all those traces to the RAM slots and cover that >300W power draw.

    If I were a customer like HP then I'd tell them where to cram it, but then I'd also be getting the full-blooded benefit of their "marketing development funds" so who knows.
  • iwod - Monday, November 5, 2018 - link

    >Ahead of the annual Supercomputing 2018 conference next week

    Or it should be Ahead of the AMD Next Horizon conference tomorrow.
  • nandnandnand - Monday, November 5, 2018 - link

    You got that right. And there's nothing about AMD's conference in this article even though we are 90% sure they will announce 64-core Epyc tomorrow.
  • benzosaurus - Monday, November 5, 2018 - link

    Been a while since we’ve seen Intel friggin panic.

    I wonder how many team leads associated with their 10nm process are going to get fired the day after it finally ships.
  • lemans24 - Monday, November 5, 2018 - link

    How is Intel panicking??? Intel is competing with a better architecture just like they did from 1974 with their first microprocessor 4004. Intel has always competed with better chips and they have nearly always won with some type of x86 derivative.
    I think it would be foolish to think that they are panicking because they just made another 16% increase in revenue last quarter to...$19B dollars!!!
  • Spunjji - Tuesday, November 6, 2018 - link

    I think it would be foolish in the extreme to look at their last quarter's results and use that to dismiss what is obviously a panic response to the imminent announcement of a new CPU architecture they will not be able to compete with for at least a year after its release, more likely 18 months.
  • imaheadcase - Monday, November 5, 2018 - link

    I remember running a tual intel cpu 800Mhz intel setup back in the day, i ran this program called Crafty on a Chess server against humans, it was the best on the server for humans vs CPU. Man times have changed. It was before Xeons and the likes, i upgraded it from 8 gigs of ram to 16gigs of ram to take advantage over higher chess tables of moves and it jumped 200 points in rankings in a week.

    Oh good times.

    Now i can't do that anymore cause i can't afford to pay a cars worth salary every upgrade. lol
  • Atari2600 - Monday, November 5, 2018 - link

    "No information was given about TDP per processor, or pricing, PCIe lanes, memory capacity/support, frequencies, or variants."

    Did you "reach out" to Intel and ask had they an industrial water cooler under the desk* when they generated the performance comparisons to EPYC?

    *That they conveniently forgot to mention - whoops - won't do it again - honest!

Log in

Don't have an account? Sign up now