In 2017, Toshiba was the first vendor to ship 64-layer 3D NAND in the consumer SSD market with their XG5 NVMe SSD. Now a little over a year later, the XG6 is the first SSD with 96-layer 3D NAND. The new generation of flash memory allows for better performance, improved power efficiency, and lower costs.

As the high-end tier of Toshiba's OEM SSD product line, the XG series is not officially available for retail purchase, but we think this one is pretty likely to be used as the starting point for a retail product. The last XG series drive with a retail counterpart was the XG3, the planar MLC-based sibling to the OCZ RD400. Toshiba's low-end NVMe BG series of single-chip BGA SSDs also got a retail version in the Toshiba RC100, mounted on a M.2 2242 card. Retail and OEM versions usually have some firmware differences and occasionally one or two significant hardware differences such as 19nm vs 15nm MLC for the XG3 and RD400, or 30mm vs 42mm card length for the BG3 and RC100. Despite those differences, OEM SSDs are usually a pretty accurate preview of later retail versions.

OEM SSDs are usually not designed with maximum performance as the primary goal. OEMs prefer to have the option of sourcing more than one SSD for use in each of their systems, and they aren't interested in paying a large premium for some of their drives to be substantially faster than the rest. That said, for certain systems OEMs do want a true high-end drive, and the bar for that gets higher with every generation. Late last year, Toshiba introduced a higher performing XG5-P variant with a focus on better performance for more intensive workloads and benchmarks that exercise the full drive capacity with lots of random access. The XG6 is only intended to directly replace the XG5, but in light of the performance increases it brings, the 1TB XG5-P is now obsolete. The 2TB XG5-P may stick around for a while longer simply because the XG6 is not available in capacities above 1TB.

The new 96-layer BiCS4 3D TLC NAND used by the Toshiba XG6 is the most advanced flash memory currently shipping, but relative to the 64-layer BiCS3 that currently makes up most of the NAND volume from Toshiba and SanDisk it is more of an incremental update rather than revolutionary change. The increased layer count improves density but the TLC die capacities are still 256Gb and 512Gb. The I/O interface has been upgraded to the Toggle NAND 3.0 standard, with speeds in the 667-800MT/s range compared to the 400-533MT/s speeds used by earlier 3D NAND from Toshiba. The speed bump brings Toshiba's NAND up to par for its current competition, but it will soon be eclipsed by the 1.4GT/s Toggle 4.0 interface that Samsung's upcoming 96L V-NAND will be using. (Though it remains to be seen whether such a big increase in interface speed will have much effect on overall drive performance when drives will still be limited to PCIe 3.0 x4 speeds for another generation or two.) The NAND interface voltage has also dropped from 1.8V to 1.2V, so the higher I/O speed shouldn't have much impact on power efficiency.

Toshiba OEM NVMe SSD Comparison
Model XG6 XG5 XG5-P BG3 XG3
Retail Counterpart None RC100 RD400
Capacities 256GB, 512GB, 1024GB 1TB, 2TB 128GB, 256GB, 512GB 128GB, 256GB, 512GB, 1024GB
Form Factor M.2 2280 M.2 2230 M.2 2280
Host Interface PCIe 3.1 x4 PCIe 3.1 x2 PCIe 3.1 x4
Protocol NVMe 1.3a NVMe 1.2.1 NVMe 1.1b
NAND Flash Toshiba 96L BiCS4 3D TLC Toshiba 64L BiCS3 3D TLC Toshiba 19nm MLC
Sequential Read 3180 MB/s 3000 MB/s 3000 MB/s 1500 MB/s 2400 MB/s
Sequential Write 2960 MB/s 2100 MB/s 2200 MB/s 800 MB/s 1500 MB/s
Random Read 355k IOPS   320k IOPS    
Random Write 365k IOPS   265k IOPS    
Power Read 4.2 W 4.5 W 4.9 W 3.3 W 5.5 W
Write 4.7 W 3.4 W 3.2 W 6.4 W
Idle 3 mW 3 mW 3 mW 5 mW 6 mW
TCG Opal Encryption Optional No

Aside from the upgrade to a new generation of 3D NAND, not much has changed from the XG5. The Toshiba XG6 is still using the same TC58NCP090GSB 8-channel controller as the XG5, but with another year's worth of firmware development. The use of an existing controller probably helped Toshiba get the XG6 out the door sooner and ensure they could be first to ship drives with 96L NAND, but it is possible that the XG6's performance is being held back a bit by the older controller. The controller is not really obsolete yet since it is still one of the most power-efficient NMVe controllers available, but the new in-house controller Western Digital debuted earlier this year gets more performance out of the same flash while usually offering similar power efficiency. Toshiba will need a new controller next year in order to keep the XG series in the high-end segment.

The basic layout of the XG6 has not changed from the XG5, though the power delivery components have been modified slightly, likely to accommodate the lower voltage for the NAND interface. The XG6 is another single-sided design to maximize compatibility with the thinnest notebook computers. Our 1TB sample has two NAND packages each containing eight 512Gb BiCS4 3D TLC dies. Toshiba is using 256Gb dies on at least some of the smaller capacities, but they won't say specifically whether it's just the 256GB model or also the 512GB model. Either way, it's nice that they are willing to use the slightly less cost-effective low-capacity parts for smaller drives in order retain most of the performance by keeping all 8 of the controller's channels populated.

Our XG6 came with an unusual rigid plastic label that gives it the polished appearance of a retail product, but doesn't actually serve as the heatspreader it resembles. Thanks to the power efficiency of Toshiba's controller, heat shouldn't be a problem at all.

The Competition

We don't get OEM SSDs in for review very often. Toshiba is only really sampling the XG series because it is where their 64L and 96L NAND have debuted, and they haven't had retail versions ready to sample instead. Most of the other drives we have to compare the XG6 against are retail models, but most of them have OEM counterparts based on the same hardware and similar or identical firmware. For example, the WD Black is closely related to the WD SN720 that was announced slightly earlier but wasn't sampled for review.

AnandTech 2018 Consumer SSD Testbed
CPU Intel Xeon E3 1240 v5
Motherboard ASRock Fatal1ty E3V5 Performance Gaming/OC
Chipset Intel C232
Memory 4x 8GB G.SKILL Ripjaws DDR4-2400 CL15
Graphics AMD Radeon HD 5450, 1920x1200@60Hz
Software Windows 10 x64, version 1709
Linux kernel version 4.14, fio version 3.6
Spectre/Meltdown microcode and OS patches current as of May 2018
AnandTech Storage Bench - The Destroyer
Comments Locked


View All Comments

  • DanNeely - Friday, September 7, 2018 - link

    As long as the tests are the same, you can always pull the comparisons up yourself in Bench.

    While I sympathize with wanting them in the article tables, 3 or 6 years of historical low/mid/high end SSDs would end up either eating a lot of the tables reducing the number of current drives listed or making them much longer, so I fully understand why very little of that data is in the main tables.
  • wumpus - Thursday, September 6, 2018 - link

    DRAM buffer isn't mentioned but board has 4 chips on it, two are obviously flash chips, one is the Toshiba controller and one is by Nanya, a DRAM manufacturer. The kicker is that as an OEM part, the final customer has no way of telling if that chip is populated before purchase (and the lack of specs make it easier to leave it off).

    Hopefully if these make it to the open market we can at least tell if they have the DRAM or not. Note that some of the cheaper NVMes (think ADATA XPG 6000) seem to do fine without DRAM, but they are priced to compete with SATA, not other NVMes.
  • Billy Tallis - Thursday, September 6, 2018 - link

    No XG6-based OEM drive is going to be DRAMless. Toshiba has the BG series for that purpose, with an entirely different controller.
  • wumpus - Thursday, September 6, 2018 - link

    Really? Then who took that photo? Is the board in the photo the board that you reviewed? That board clearly has this chip on it:
    That's a 4Gb (512MB) LPDDR3 DRAM chip. Don't tell me that the board in the photograph doesn't have DRAM. They might not ship DRAM with the OEM devices, but that doesn't mean they didn't give you a SSD with DRAM to review.
  • MrSpadge - Thursday, September 6, 2018 - link

    He did not say
    "No, XG6-based OEM drive is going to be DRAMless",
    "No XG6-based OEM drive is going to be DRAMless."
    i.e. none of these drives will be DRAMless.
  • wumpus - Thursday, September 6, 2018 - link

    My eyes are going. Should I go get a monitor with less dot pitch or get a mac where it doesn't force dot pitch to the monitor size? Decisions, decisions.

    Commas are just to small for modern monitors. I was planing on getting higher dot pitch, but now I'm wondering.
  • Valantar - Friday, September 7, 2018 - link

    I doubt a different monitor would help if your eyes are inserting punctuation where there is none - missing it when it's there is another matter. Besides, the fact that the sentence with an inserted comma doesn't add up grammatically should have tipped you off.
  • Walkeer - Thursday, September 6, 2018 - link

    testing ssd performance on intel plaform is like testing race slicks tires on a child paddle car. Intel I/O performance went down by tens of percents with all the meltdown/spectre mitigations. please use AMD plaform instead
  • MrSpadge - Thursday, September 6, 2018 - link

    Usually they keep testing environments consistent for 1-2 years exactly due to such changing software conditions. It could well be that the next test suite will feature AMD CPUs and, as always, yield results not strictly comparable to the older ones.
  • 29a - Thursday, September 6, 2018 - link

    If that was the case they wouldn't use the spectre/md patches.

Log in

Don't have an account? Sign up now