Update 1/6: HDMI Forum has notified us that the HDMI 2.1 uses DSC 1.2 compression for everything higher than 8K with 4:2:0 chroma sub sampling. The story was updated accordingly.

The HDMI Forum on Wednesday announced key specifications of the HDMI 2.1 standard, which will be published in the second quarter. The new standard will increase link bandwidth to 48 Gbps and will enable support for up to 10K resolutions without compression, new color spaces with up to 16 bits per component, dynamic HDR, variable refresh rates for gaming applications as well as new audio formats

The most important feature that the HDMI 2.1 specification brings is massively increased bandwidth over predecessors. That additional bandwidth (48 Gbps over 18 Gbps, a bit more than what a USB-C cable is rated for) will enable longer-term evolution of displays and TVs, but will require the industry to adopt the new 48G cable, which will keep using the existing connectors (Type A, C and D) and will retain backwards compatibility with existing equipment. The standard-length 48G cables (up to two meters) will use copper wires, but it remains to be seen what happens to long cables. It is noteworthy that while some of the new features that the HDMI 2.1 spec brings to the table require the new cable, others do not. As a result, some of the new features might be supported on some devices, whereas others might be not.

The increased bandwidth of HDMI 2.1’s 48G cables will enable support of new UHD resolutions, including 4Kp120, 8Kp100/120, 10Kp100/120, and increased refresh rates. It is no less important that increased bandwidth will enable support of the latest and upcoming color spaces, such as BT.2020 (Rec. 2020) with 10, 12, or even more advanced with 16 bits per color component and without compression. HDMI Forum does not say it explicitly, but the version 2.1 of their standard will also likely support the BT.2100 (Rec. 2100), which has a number of important enhancements to the BT.2020 when it comes to HDR. While HDMI 2.0 already supports BT.2020 and HDMI 2.0b adds support for HDR10 (through support for Hybrid Log-Gamma (HLG)), it only can transmit 10 and 12 bits per sample at 4Kp60 resolution. To support HDR at 8K, one will need HDMI 2.1.

Key HDMI 2.1 Improvements Over HDMI 2.0/2.0a
  HDMI 2.0 HDMI 2.1
Physical Bandwidth 18 Gbps (with High Speed cable) 18 Gbps (with High Speed cable)
48 Gbps (with 48G cable)
Maximum Resolution (2D) 4K (4096×2160) @ 60 Hz (4:4:4) 4K (4096×2160) @ 120 Hz (4:4:4)
8K (7680×4320) @ 60Hz (4:4:4)
8K (7680×4320) @ 120Hz (4:2:0)
10K @ 120Hz (?)
Maximum Color Depth 48 bits (at 4K) 48 bits (at 8K+)
HDR Static Dynamic
Game Mode Variable Refresh Rate No Yes
Object-Based Audio (eARC) No Yes

Moreover, the new HDMI 2.1 standard brings support for dynamic HDR metadata, enabling content makers to control levels of color, contrast and brightness on a frame-by-frame basis. The important part here is that dynamic HDR will not require the new 48G cable to handle video in up to 4Kp60 resolution and thus manufacturers may add support for dynamic HDR even using a firmware update. That is not going to work for a lot of existing equipment because display pipelines work differently and many TVs are incapable of anything beyond HDR10. Moreover, recorded media (i.e., Ultra HD Blu-ray) does not currently support dynamic HDR (and when the next-gen standard emerges, it will bring a lot of other features, including a new content protection algorithm), which means that two primary sources for dynamic HDR content will be games and streaming media (which is an interesting thing, given the focus of AMD’s recently announced FreeSync 2 technology). It is also noteworthy that HDMI Forum does not currently mention particular HDR implementations, but only says that the HDMI 2.1 standard will support a variety of them.

In fact, dynamic HDR will not be the only feature of the HDMI 2.1 specifications applicable to games. Among other things, the new standard will support the game mode variable refresh rate (GM VRR). Nowadays, AMD already supports FreeSync-over-HDMI using a custom mode and with the HDMI 2.1 everything gets a little easier. The HDMI 2.1 GM VRR will work for 4Kp120 and 8Kp60 resolutions with the new 48G cable, but for lower resolutions/refresh rates, the HDMI 1.4 cable will be enough. We do not known whether current-gen sources (i.e., GPUs and consoles) could be updated to support the HDMI 2.1 GM VRR, but the upcoming graphics processors are going to support the tech simply because they are going to support the HDMI 2.1 in general. When it comes to sinks (i.e., TVs, displays), it is unclear whether this is a full-on requirement - if all sinks will need to support VRR - but it is likely that they will support it in their next generations as well. Meanwhile, support of GM VRR by HDMI 2.1 also means that variable refresh rates may be coming to next-generation consoles (whenever they come out), finally making the feature a default one for gaming.

The final capability of the HDMI 2.1 specification is the eARC — support for object-based many-channel audio formats. The HDMI Forum did not mention specific brands, but Dolby Atmos and DTS:X seem to be the most likely candidates to support.

The HDMI 2.1 specification brings a number of long-awaited features to the table, some of which may show up in shipping products sooner, the other will become available years from now. HDMI Forum plans to publish the final standard in Q2 2017 and release the HDMI 2.1 compliance test specification in Q2 or even Q3 2017. That said, do not expect any features of the new spec to become available earlier than in the second half of this year (2018 seems more likely). Meanwhile, from licensing standpoint, any company with a license for the HDMI 2.0 spec can have access to the HDMI 2.1 blueprints.

Source: HDMI Forum

Comments Locked

40 Comments

View All Comments

  • qap - Friday, January 6, 2017 - link

    My point is, that not even the best lossless compression can maintain ANY predefined compression ratio. If you look at some pages, that specialize in this kind of video compression, you will find, that under pretty normal circumstances even 2:1 is sometimes not achieved. And I am talking about average over longer sequences and those are not real-time low-latency codecs, but heavy-weight codecs! Peeks are obviously even worse. Check for examle (MSU looks like one of the best):
    http://www.compression.ru/video/ls-codec/index_en....
    or
    http://forum.doom9.org/showthread.php?p=1463278#po...
  • HardwareDufus - Thursday, January 5, 2017 - link

    the capability has increased so much that I was surprised they did not call it HDMI 3.0... However, seeing that license 2.0 holders have access to this 2.1 upgrade explains it....
  • Michael Bay - Thursday, January 5, 2017 - link

    Capability will actually increase when between you and me we have two TV sets and all companion hardware with full support of the standard. Until then it`s just a storm in the glass.
  • lilmoe - Thursday, January 5, 2017 - link

    Not bad summing up all the damn problems in display tech in one sentence.
    +1
  • Poik - Thursday, January 5, 2017 - link

    How can 2m be the max for a standard cable? I wish HDMI would just die. DP gives you 3m and always seems to be a half step ahead.
  • DanNeely - Thursday, January 5, 2017 - link

    Because crosstalk and external interference problems get steadily worse at higher signally rates. Most likely longer cables will end up looking more like thunderbolt or SPF networking cables with transceiver modules in the cable plugs themselves to put the long distance signaling hardware on the cable side of the socket and able to transparently -to the end user- switch from wire to fiber.

    As for DP always being half a step ahead, HDMI 2.1 appears to reflect the HDMI association getting tired of people saying that and decided to make a much larger leap ahead. The latest DP standard only has 32Gb of pre-encoding bandwidth.
  • ruthan - Thursday, January 5, 2017 - link

    Why is there other stupid limit - 120 Hz, there are already 144 Hz displays. Why not - 240 Hz for 4k and 120Hz for 8k?
  • A5 - Thursday, January 5, 2017 - link

    120 is a far more common target in TVs because it is a multiple of both 24 (film) and 30/60 (NTSC TV).

    The HDMI forum is not particularly concerned with computer displays, having ceded that space to DisplayPort.
  • alphasquadron - Thursday, January 5, 2017 - link

    Does it cost more or something to make it 144Hz instead of 120Hz. DisplayPort is great but not every TV has those.
  • weilin - Thursday, January 5, 2017 - link

    30/60 doesn't really divide cleanly into 144, so ya it would be extra hardware so support both 120Hz and 144Hz refresh rates. You can't just support 144Hz or 30/60Hz sources will start experiencing judder...

    Also, I have also never seen a TV supporting 144Hz refresh...

Log in

Don't have an account? Sign up now