The iPhone 6 was a runaway success by any measure. The A8 SoC may have been built on a temperamental 20nm process – something that dogged all other phone vendors – but for Apple it didn’t matter. The iPhone 6 was the first iPhone generation with a phablet variant. By all metrics it was a resounding success as it capitalized on this pent-up demand for larger iPhones.

The iPhone 6s continued this success, and in a year of disappointing launches due to the weak showing of the widely used Snapdragon 808 and 810, the 6s and 6s Plus looked particularly good as the competition really couldn’t measure up. There were a lot of Android devices that performed better than the iPhone 6s/6s Plus in some particular area – a better camera or longer battery life, for example – but taken as a whole the iPhones 6s were just clearly superior devices. If nothing else, they hit that particular balance between features and performance that a lot of users were looking for.

Meanwhile, the addition of 3D Touch was the sort of refinement to the user experience that still remains exclusive to the iPhone. Other OEMs have implemented some form of force sensing, but the implementation is not really executed in a way to improve user experience in a noticeable way. Adoption remained weak as well, with no real widespread support in the ecosystem for such features.

That said, the iPhone doesn't exist in a vacuum on its own. Even in the high-end market segment Apple limits themselves to, they have a loyal opposition, and that opposition is of course Samsung. Looking at the state of affairs there, relative to the iPhone 6s the Galaxy S6 had a better camera for still images, but it was obvious that it couldn’t freeze motion as well. The phone itself felt like a brick despite its 6.8mm thickness due to the relatively enormous battery. Despite the larger battery, battery life on LTE just wasn’t where it needed to be. The Galaxy Note5 was in many ways a similar story, which isn't too surprising as the Note has moved closer and closer to being a phablet-version of the Galaxy S.

But, as the story goes, Apple's competition has improved and advanced. The Galaxy S6 gave way to the even better Galaxy S7, HTC finally found their groove with the HTC 10, and OnePlus's 3 is their best showing yet. The competition is getting better, and with the iPhone 7, Apple can no longer rely on weak competition or pent-up demand for some major feature. The iPhone 7 must stand by its merits against this increasingly stiff competition.

It’s interesting to write a review like this, because for better or worse, I didn't have serious exposure to the iPhone from the beginning. When the first iPhone launched in 2007, I was in school and still used a flip phone that spent most of its time functioning as an alarm and a timer and not much else. My first exposure to the iPhone was the 3GS a few years later, which left a fairly poor taste in my mouth as it just didn’t feel all that functional. The iPhone 4 was miles better, but even then it felt like the experience was constrained. Something as simple as turn by turn navigation which I took for a given on Android devices like the Galaxy S1/Captivate and the Desire HD/Inspire 4G were basically absent on iOS unless you were willing to pay a significant amount of money for a third party application. The default maps application didn’t offer that kind of functionality and Google Maps was completely absent, as was YouTube. For better or worse, for years after this initial brush with iOS I stuck with Android devices. It wasn’t until iOS 8 and the iPhone 5s that I really started doing any kind of examination of iOS devices again.

Reviews are normally no place to be discussing one's life story, because realistically no one reading this review really cares about the person writing this review. But the perspective here matters when considering the approach I've taken to this review. I’ve spent the past two years using the iPhone 6 as a secondary phone so I’m increasingly aware of how iOS works, but even as good as the iPhone 6/6s series were, Android devices remain my daily driver for familiarity reasons. It’s easy to overlook flaws in Android devices if you never actually have to use them as a daily driver, so this review attempts to avoid the common issue of a double standard for reviews between Android and iOS devices. With that said, we can move on to the basic specs.

Apple iPhone 7 and 7 Plus
  Apple iPhone 7 Apple iPhone 7 Plus Apple iPhone 6s Apple iPhone 6s Plus
SoC Apple A10 Fusion
2 x 2.3 GHz Hurricane
2x little cores
Apple A9
2 x 1.85GHz Apple Twister
GPU 6 Core PowerVR GPU PowerVR GT7600
Display 4.7-inch 1334 x 750 IPS LCD, DCI-P3 5.5-inch 1920 x 1080 IPS LCD, DCI-P3 4.7-inch 1334 x 750 IPS LCD, sRGB 5.5-inch 1920 x 1080 IPS LCD, sRGB
Size / Mass 138.3 x 67.1 x 7.1 mm, 138 grams 158.2 x 77.9 x 7.3 mm, 188 grams 138.3 x 67.1 x 7.1 mm, 143 grams 158.2 x 77.9 x 7.3mm, 192 grams
Battery 1960 mAh
(7.55Whr)
2900 mAh
(11.17Whr)
1715 mAh
(6.6Whr)
2750 mAh
(10.59Whr)
Rear Cameras 12MP ƒ/1.8
OIS, Wide Color Gamut, Quad LED True Tone Flash
12MP ƒ/1.8 wide angle,
OIS, Wide Color Gamut, Quad LED True Tone Flash

12MP ƒ/2.8 telephoto,
2x optical zoom, Wide Color Gamut, Quad LED True Tone Flash
12MP with 1.22µm pixels + True Tone Flash 12MP with 1.22µm pixels + True Tone Flash + OIS
Front Camera 7MP ƒ/2.2, Wide Color Gamut, Retina Flash 7MP ƒ/2.2, Wide Color Gamut, Retina Flash 5MP F/2.2 +
Retina Flash
5MP F/2.2 +
Retina Flash
Storage 32GB/128GB/256GB 16GB/64GB/128GB (Launch)
32GB/128GB (Refresh)
I/O Apple Lightning connector Apple Lightning connector, 3.5mm headset
WiFi 2.4/5GHz 2x2 802.11a/b/g/n/ac, BT 4.2, NFC 2.4/5GHz 2x2 802.11a/b/g/n/ac, BT 4.2, NFC
Launch Price $649/749/849 32/128/256GB $769/869/969 32/128/256GB $649/749/849 16/64/128GB $749/849/949 16GB/64/128GB

Looking at the basics, the iPhone 7 and 7 Plus bring at least a few new things to the table that we haven't seen from Apple before, such as their first SoC with heterogeneous CPU cores. The iPhone 7 Plus brings a second camera with a full-frame equivalent focal length of 56mm, which isn't really a unique idea but does represent a unique execution, as the G5's second camera has an even shorter focal length. There's some irony here as Corephotonics and Qualcomm have been demonstrating almost the same implementation as what we see in the iPhone 7 Plus, but Apple is the first to market here. IP67 means the iPhone is impervious to dust and is capable of sustaining 1 m of water depth for at least 30 minutes, but water damage is never covered by warranty so you shouldn't push your luck here. Other changes here are more subtle such as the quad LED flash with PWM compensation, stereo speakers, and doubling the storage for all models relative to the 6s last year.

Finally, on a quick housekeeping note before we get started, I want to mention that we’ve changed our review format a bit this year compared to past reviews. Because our analysis on a few deep-dive items is going to take a bit longer – both the new low power CPU cores of the A10 Fusion SoC and wide color gamut of the new cameras present us with some particularly interesting scenarios – rather than hold everything back we’ve split things up. Today’s review of the iPhone 7 is just that, a review of the phone. Meanwhile we’ll be publishing a deep dive article later this month on A10, Hurricane, A10’s GPU, wide color gamut photography, and the rest of those fine architectural details that we like to dig into.

Design

To start the examination of the iPhone 7 and 7 Plus beyond bullet points on a spec sheet, we can look at the design of the iPhone 7. It’s easy to take a potshot here and claim that the iPhone 7 and iPhone 6 have identical designs, but the design is different enough that you can identify either the iPhone 7 or 7 Plus from a distance if you can see the camera or back cover in general. However, if you can only see the front of the phone it’s not going to be easy to tell the iPhone 6 and 7 apart. Just about the only differentiating feature here is that the new earpiece is now slightly wider. We seem to receive requests for continued comparison of design details, and here the iPhone doesn’t have any obvious issues. The ambient light sensor appears to bisect the earpiece, while the front-facing camera is lined up with the earpiece.

What is noticeable if you use the phone is the new solid state home button. While there is a new Taptic Engine to enable this home button, it does take getting used to as the home button is not a one-to-one replica of a physical home button as far as the haptic sensation goes. The Taptic Engine manages to create a facsimile of what a home button should feel like but unlike a real button it doesn't actually depress so it isn't quite as accurate as something like the Macbook trackpad in replicating the feel of a real button.

From there, the iPhone 7 and 7 Plus see some notable changes to the back and sides of the phone. While the buttons, downward firing speaker, and Lightning port remain in the same place, the 3.5mm jack has been removed. There’s been a lot of discussion here but after trying some pre-production AirPods I think it’s fairly safe to say that wireless is the future for any kind of mobile device, but the execution itself requires closer examination here that doesn’t necessarily fit into this part of the review. The one notable change here is to the SIM tray, which appears to have some kind of gasket to seal it against water and dust ingress.

Looking at the back of the phone you really see most of the design changes. I’ve noticed a lot of people seem to believe that there's nothing notably different about this kind of back cover design, but it seems that a lot of this boils down to some similarities in shape and the use of aluminum. I would argue that aluminum alone doesn't define industrial design, as the One M7 and iPhone in all iterations don't really share much in common. Similarly, I would argue that the Honor 8 and Galaxy Note7 don't share a lot in industrial design just because both use tempered glass back covers along with an aluminum frame. Of course, if material changes are the only thing that matter then the jet black variant of both the iPhone 7 and 7 Plus have a notably different design for this color variant alone, which has a glossy anodized finish instead of a sand-blasted one.

Putting aside discussions of materials, the iPhone 7 and 7 Plus both have distinctive changes to the antenna lines and the camera hump. While the iPhone 6 and 6s really tried to avoid showing a camera hump at all, the iPhone 7 and 7 Plus have distinct designs that highlight its presence even if the profile of the hump has been changed to make the difference in thickness less dramatic. The iPhone 7 also has a noticeably larger cover lens, but this isn't all that noticeable unless you have the iPhone 6 and 7 side by side. The iPhone 7 Plus on the other hand has a distinctly different camera design as the dual cameras are very obviously a point of differentiation compared to the iPhone 6 and 6s Plus.

The other noticeable difference is how the back cover integrates the external antennas. The use of parts of an aluminum unibody as an antenna isn't a new idea and dates as far back as the iPhone 4. However, the polycarbonate lines that help to separate the antenna from the rest of the back cover have been moved around to make them less noticeable. The jet black variant has especially close color and texture matching, which makes the antenna lines basically invisible. It's interesting to see how various OEMs have attempted to avoid or not avoid the issue of hiding these antenna lines, as Apple's approach here is fairly unique as far as I can tell. The jet black variant also helps to make the entire phone look like a monolith. The in-hand feel is distinguished in the sense that it's glossy all around instead of the traditional matte finish that is used in aluminum unibodies but really it almost just feels as if it's made of glass and is very smudge-prone even with the oleophobic coating and can easily scratch compared to something like glass.

Apple has also made new leather cases to fit the iPhone 7 and 7 Plus. The general design and feel isn't changed significantly, but the buttons are now made out of aluminum which improves the feel of them significantly to the extent that I don't feel like I'm losing anything in feel relative to the naked phone. This helps to differentiate them relative to third party cases, particularly as the cost is generally much higher than the average case you might find on Amazon. In general the design is also well executed for a slim case as the camera hump isn't exposed and the display is recessed a bit to avoid direct contact in a drop.

Overall, the design of the iPhone 7 and 7 Plus is mostly an evolution of the iPhone 6's design, but it changes enough things that it doesn't necessarily feel like it's the same exact thing. I would say that it isn't quite as dramatic as the change from the One M9 to the HTC 10 but it is more noticeable than something like the change from the S6 edge+ to the Note7. The in-hand feel remains good and there are no noticeable problems there. I don't think that the design is especially notable at this point, but there are only so many ways to make a phone.

Display
Comments Locked

377 Comments

View All Comments

  • solipsism - Monday, October 10, 2016 - link

    I'n the opposite of mkaibear. I prefer my iPhone but I have nothing against Android, WinPhone, or OEMs building devices for those OSes.

    I'm also glad to know what he uses and prefers. Wouldn't you want to know that I used an iPhone if I was reviewing an Android-based device?

    You can tell Brandon goes out of his way to be objective in his writing, even when decisions are somewhat opinion-based. This is not a gift that I see too often, so I appreciate it when I do.
  • mjh483 - Monday, October 10, 2016 - link

    Simple. Android vs iOS. Android can do things that iOS simply can't.
    Just because Android provides features that he needs doesn't mean he can't appreciate iOS.
    I think everyone needs to read the review carefully, because it's not like he is praising everything. He DID criticise the low resolution of the Retina display.
    And he gave logical reasons for things that he is impressed about. If you wanna refute that, then it's only right for you to come up with your own logical reasoning to back it up.
  • Infy2 - Monday, October 10, 2016 - link

    I am interested in the color space of the jpgs the camera produces, since the phone itself shows them in wider than sRGB. How will the jpgs be shown by color space aware programs and "normal" programs, like web browsers, that dont know anything about color profiles or color management?
  • Infy2 - Monday, October 10, 2016 - link

    Digging up shows the jpgs show color space as "[EXIF] ColorSpace: Uncalibrated" but they have embedded ICC P3 color space profile. Viewing the jpgs on Windows 10 with uncalibrated sRGB monitor (manufacturer's stock ICC profile installed though) shows very small difference in color intensity between color managed and non-color managed programs. Overall I dont see it as big issue that the world's most popular camera phone produces images in non-sRGB color space.
  • bw13121 - Monday, October 10, 2016 - link

    I'm hoping the deep-dive includes a section on the choice of modems. Whether the Intel or Qualcomm radios- the process technology, signal performance, power consumption and a list of supported radio bands themselves. There have been rumours that the Qualcomm radio in the non EU countries is on a newer process and supports more bands? Also, it is Cat 12 Vs Cat 10 Intel XMM7360.

    Thoughts anyone?
  • jlabelle2 - Wednesday, October 12, 2016 - link

    It makes little sense. Either the P3 ICC profile is embedded in the JPEG and only color profile aware software can show them properly (so very little on a Windows PC, and none on an Android or Windows phone) or it is not and the pictures will appear under saturated everywhere but some Apple devices / apps.
  • grayson_carr - Monday, October 10, 2016 - link

    Not sure about other browsers, but Safari supports proper color management and will display jpegs in their proper color space. I did notice that viewing iPhone 7 photos on an Android device makes them look far worse though because Android devices compress everything down to fit inside sRGB, making iPhone 7 photos look undersaturated on Android phones.
  • jlabelle2 - Wednesday, October 12, 2016 - link

    Yes but this is quite an exception. IE or Chrome or Edge for instance does not support reading the ICC profile of embedded image. Same for most software or app and same for ALL Android and Windows Mobile apps.
    Android is not "compressing anything". It just pass the RGB value to the screen.
    On a aRGB or P3 JPEG, a 100,0,0 pixel represents a more satured red than a 100,0,0 in sRGB color space.
    So if you display on a sRGB screen, without color management transforming the value to an equivalent one on the smaller color space, the colors will be displayed logically much less saturated.

    I ask already this question to Brandon on the iPad Pro review but never get answer on this very practical question. He mentioned future proof but TODAY, if really the pictures of the iPhone 7 are taken in a wider color space than sRGB, it is a big BIG issue as it means that you cannot basically share it to almost anyone (on 93% of Windows PC and Chromebook, on 85% of the mobile phones) because it will not be displayed properly.
    It seems so counterproductive that I have no idea why Apple would do that except to try cheating people making them believe of the advantage of their wider color gamut screen while the difference is mostly due to the color management issue (almost no real life pictures go beyond sRGB gamut).
  • Constructor - Monday, October 17, 2016 - link

    The way it should be working is this:

    • The camera shoots the picture in P3 color space and attaches the appropriate P3 profile to the picture, so any color-managed software knows precisely what the colors are supposed to look like.

    • On a display with a smaller color space the image color space will have to be compressed into the smaller space – you cannot see the colors as they actually were but only a less saturated, incorrect image but it will be fit into the smaller space as well as possible if color management is present, for instance preserving the color balance even if the display is just weak in blues or reds. If no color management is present, the image can become discolored on top of the compression, depending on the exact limitations of the display.

    • On a display with full P3 color space you see the colors from the P3 photo precisely as they actually were, exploiting the full gamut.

    • With a photo coming from a smaller color space such as sRGB, the color-managed P3 display would display this photo as it is supposed to look like, namely with its sRGB colors.

    Without color management the gamut would simply be blown up to full P3 gamut, incorrectly oversaturating the image.
  • jlabelle2 - Monday, October 24, 2016 - link

    "The way it should be working is this:"

    Well less and no. You are totally CORRECT on the behavior today: it seems to have been confirmed that the JPEG have the DCI-P3 color space embedded but I have not be able to find some iPhone 7 images that did not have sRGB instead...

    So if this is the case, it means, exactly as you said that basically more than 85% of the population (all Android and Windows PC/laptop/tablet users) will see the image wrong, desaturated because of the smaller gamut of their screen.

    Saying that what it should do is to implement it so that you can NOT share it with 86%+ of the population is ... weird.

    What Apple could have done is to let the user select this in the settings like every camera able to capture wider gamut than sRGB do. But no. It is Apple. So for the excuse of making things simple, they screw up the very vast majority of the population.

    The fact that it can be put by Anandtech in any positive way is really puzzling. Anand would have had better knowledge than that but he is not here anymore.

Log in

Don't have an account? Sign up now